Yes, if you have exposure,even from a side angle at a fairly close distance it can give you a flash burn. I have had it happen to me with a 75watt incandescent bulb not properly shielded.
When a light bulb is turned off, the filament inside is still hot and continues to emit light for a brief moment before cooling down completely. This causes the light bulb to flash before going completely dark.
Takes 300 hours for the average light bulb to burn out
You probably have a light bulb burn.
glass
light bulb is about to go
it will burn
Takes 300 hours for the average light bulb to burn out
If its an incandescent bulb the filament burns out; depending on the voltage put through the bulb (and the operating voltage of the bulb) the results can be quite spectacular. Normally the filament will burn out with a bright flash, if the voltage is high enough the bulb may explode.
The light bulb will probably burn out, if the fuse of the lamp does not burn out first. On the other hand, a lamp with 240V rating can still be used in the USA, but the light will be about half as bright for the same light bulb.
It depends upon the wattage of the light bulb. The lower the bulb wattage the lower the heat generated by the bulb. A 100 watt bulb should generate enough heat to destroy a rubber band.
it simply means that a wire from the light bulb is joined or connected to the charged plates of the capacitor.resulting to discharged of the capacitor.
A 13.5 volt bulb will burn less brightly but last longer.