A syringe demonstrates the relationship between pressure and volume. When you pull the plunger, the volume inside the syringe increases, causing the pressure to decrease. This is because the air particles inside the syringe become more spread out, resulting in lower pressure.
A syringe is similar to a balloon in effect on pressure. The more air you insert, the less space for fluid. The more pressure exerted on it, the less volume of air and the more the liquid would fill up the space.
When the pipe diameter decreases, the gas flow becomes more restricted, causing an increase in pressure. This is known as the Venturi effect, where the fluid velocity increases as it passes through a constricted section, leading to a decrease in pressure.
Increasing the force on the plunger will decrease the volume of air in the syringe as the increased pressure compresses the air.
A gas syringe is basically a device that fills up with a gas that is produced and gives a volume for that gas. Gas from a reaction is forced into the syringe due to pressure and the syringe plunger is forced out (just like how you suck up a liquid with a normal syringe). It can be used to detect the volume of gas produced in a chemical reaction for instance.See the Web Links to the left for more information.
Well, honey, the diameter of a column of water doesn't give a hoot about the pressure at the bottom - it's all about the height of the column. The pressure at the bottom is solely determined by the weight of the water above it, not how fat or skinny the column is. So, don't worry about measuring the diameter, just focus on how tall that water tower is!
it dose because it is not sterial any more
Of course not! A 0.5 ml syringe contains 40% more volume (0.5 - 0.3 = 0.2 ml) than a 0.3 ml syringe.
35 cm
To increase the pressure you would have to reduce the diameter of the pipe. Half the diameter would give you twice as much pressure. Therefore to get 25 percent more pressure you would reduce the diameter by 25 percent giving you 37.5. Be careful though, this only increases the water pressure not the water flow rate.
The elasticity enables the arteries to change their diameter. Smaller means more pressure, larger means lower pressure.
large diameter wire simply because it will move easier Technically they would have the same resistance, but the larger diameter wire would allow more current to flow as it would have more room to move.