inlet and exaust valves are usually opened by a lobe on a crankshaft, either directly, or with a pushrod and rocker arm assembly.
Closed
Camshaft opens and closes the valves The CAMSHAFT is connected to the CRANKSHAFT with gears so that the valves (intake and exhaust valves) are opened and closed at the proper time for each cylinder, and fully sychronized for with the movement of all of the other parts of the engine.
A valve is the device used to control the flow of liquid. Valves can be opened or closed to regulate the amount of liquid passing through a pipeline or system. There are different types of valves, such as gate valves, ball valves, and butterfly valves, each serving specific purposes in liquid flow control.
a pump consisting of a piston that moves back and forth or up and down in a cylinder. The cylinder is equipped with inlet (suction) and outlet( discharge) valves. On the intake stroke, the suction valves are opened, and fluid is drawn into the cylinder. On the discharge stroke, the suction valves close, the discharge valves open, and fluid is forced out of the cylinder.
When the atria contract, there is increase in pressure in the atrial chambers. So both bicuspid and tricuspid valves opened up. When both the ventricles contract, both the bicuspid and tricuspid valves get closed. This opens up the aortic and pulmonary valves.
The valves in a car engine are opened and closed by a cam shaft driven by the engine crankshaft. they allow the flow of gases and fuel into the engine and the burnt gases out of the engine into the exhaust system.
Call a plumber. Check that you re-opened all the valves you closed.
Sequence valves are used in aircraft having a retractable undercarriage because there is a certain sequence to the way things must be done. For example, before the landing gear can come down, the door on the undercarriage must be opened for it.
fluids or gases in a system. They can be opened or closed to regulate the flow rate, direction, or pressure of the substance passing through them. Valves are commonly found in pipelines, plumbing systems, and various industrial processes.
The different types of old shower valves include compression valves, ball valves, cartridge valves, and thermostatic valves.
it was because of a 2 valve flushing system on some toilets. #1 was a minor flush #2 opened both water flapper valves in order to maximize the flush:)