0
To convolve two pulse signals, you can use the convolution integral if they are continuous signals or the discrete convolution sum for discrete signals. Essentially, you flip one of the signals, shift it across the other, multiply the overlapping values, and integrate (for continuous) or sum (for discrete) the results at each shift. This process combines the two signals, resulting in a new signal that represents the area of overlap at each point in time. The convolution operation captures how the shape of one signal affects the other.
What else can I help you with?
Speedo pulse wire?
A speed pulse wire might refer to the speedometer pulse wire that accepts pulse signals in order to display speed. This wire is generally a two wire sender unit that comes pre-calibrated to the vehicle.Ê
How often do Ethernet adapters and hubs or switches exchange link pulse signals?
When an Ethernet adapter and a hub are properly connected, they exchange link pulse signals every 16.8 milliseconds to test the connection.
What is an allomantic pulse in the Mistborn series?
An allomantic pulse is a signal a person burning metals emits. The signals can be traced by someone burning bronze.
How does differential pulse code modulation lower the bit rate of transmitted signals?
It signals the difference between successive sample sizes
Can a Faraday cage effectively block EMP (Electromagnetic Pulse) signals?
Yes, a Faraday cage can effectively block EMP signals.
How are coins found using a metal detector?
Coins are found by the detector sending a pulse which picks up metal signals. Now there are two types a low frequency and a pulse indicator, the low frequency is used to pick up deeper objects
What signals injector to pulse on a 1985 corvette?
The engine control by way of the ignition module.
When was Pulse Two created?
Pulse Two was created on 1989-05-01.
Why should we use pulse transformer rather than ordinary transformer?
Pulse transformers are designed to accurately reproduce signals with fast rise-times. They are not very good at reproducing normal sinusoidal AC signals. Pulse transformers are used to trigger SCR's, for instance, in motor controls and lamp dimmers. If you open up a photoflash unit, you will most likely see a small pulse transformer used to trigger the high-voltage pulse to the Xenon photoflash tube.
The energy carried by an electromagnetic wave is called?
EMP or electromagnetic pulse. It can disrupt electronic systems, and signals.
Why is a demodulator needed to recover the pulse waveform?
The received waveforms are in the pulse-shape form. And yet the demodulator needs to recover the pulse waveform.Reason: The arriving waveforms are not in the ideal pulse shapes.Filtering caused ISI and signals appear to be "smeared" and not ready for sampling and detection.Demodulator goal is to recover baseband pulse with best SNR and free of ISI.
Why do you get misfires with new coils?
Crank position sensor........going bad.....You didn't say what car it is..but.. some have two signals coming from it. 3x pulse and a 16x pulse. If either one of these pulses fail, your car wont fire right or not at all. It will still run if the cam sensor is a miss, though...
