To remove linseed oil from a terrazzo floor, start by blotting up any excess oil with paper towels. Then, mix a solution of warm water and a few drops of dish soap, and gently scrub the affected area with a soft cloth or sponge. For stubborn stains, you can apply a mixture of baking soda and water to create a paste, let it sit for a few minutes, and then scrub lightly. Rinse the area thoroughly with clean water and dry it to prevent any residue.
oil on Terrazzo is not a good idea
Yes, linseed oil is combustible.
Yes, linseed oil is flammable.
No, linseed oil is not a saturated fat; it is a polyunsaturated oil.
why i linseed oil not used on oil stones
Linseed oil is a traditional PRESERVATIVE and has been used for centuries for concrete, masonry, wood and metal. You would mix it 1 parts linseed to 2 parts turpentine (not mineral spirits), but the mixture would vary. You want to used boiled linseed oil, not raw linseed oil (check the label). Note this is not a SEALANT but a preservative- if you are doing your garage or basement floor, try something else! Also be careful- the tools and rags you use can spontaneously combust (i.e.: burst into flame, no kidding!) when being used with linseed oil. Check the Wikipedia page for details under "Linseed Oil"
An alternative to linseed oil for oil painting is walnut oil.
Yes, boiled linseed oil is flammable.
Yes, linseed oil is flammable when dry.
Double boiled linseed oil contains extra chemical additives that boiled linseed oil does not have. These chemical are added to help with the drying process.
A suitable substitute for linseed oil in oil painting is walnut oil.
We use linseed oil because it soaks into the the bat and makes it moist and knocking in becomes much easier but make sure to use raw linseed oil and not boiled linseed oil. The bat does not soak boiled linseed oil. Raw linseed oil not only increases the life of the bat but also makes the performance of the bat better.