answersLogoWhite

0

Depending on how deep it is in, and how large it is. First thing thing to try is press down on the shank in such a fashion that you are pushing the bend of the hook away from the barb and then to try to back the hook out in the direction it went in. If you think about it, that's probably how you remove the hook from a fish. Some find it advantageous to loop a line through the bend of the hook, have someone gently try to pull the hook backwards while you push the hook down. Another tactic is to push the point of the hook out of the skin, cut the eye off and just pull the hook the rest of the way out. Regardless of the way you get it out, do not delay in getting a tetanus shot, make sure you try to get the wound to bleed (to self-clean the wound). Use a good antibiotic ointment and cover the wound with a band-aid.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How do you remove windshield wipers on a 1992 crown vic?

The 1992 Ford Crown Victoria has the most common U-Hook wiper blade arm attachments. You press a button or tab and pull the wiper blade out of the hook. See Hook Arm Attachment Videos below...its a very easy install.


How do i remove Nissan Pathfinder wiper blades?

This will vary depending on the year of the Pathfinder. All Years = Hook-end FRONT wiper arm 1987-2003 = Hook-end REAR wiper arm 2004-Current = Rock Loc 3 REAR wiper arm See sources and related links below for installation videos.


How do you remove wiper blades on a 1997 Subaru legacy?

The 1997 Subaru Legacy has the most common hook-end wiper arms. There will be a little tab or button where the wiper blade is inserted into the hook on the wiper arm. Press and pull wiper blade out of hook. Sometimes you need to rotate and flex the blade a little bit to make enough clearance. See hook arm videos below.


How do you remove wiper blades on a 2008 Scion xb?

The front wipers have hook-end arm attachments and the rear wiper has the special "A" arm attachment. See sources and related links below for installation videos.


How do you remove old wiper blade 2005 Jeep liberty?

The 2005 Jeep Liberty has the common U-Hook wiper arm attachments. Very simple - look for a little tab where the wiper blade is inserted into the hook of the arm. Press tab and pull wiper out of hook being careful not to bend the wiper arm in any way. Once you buy the correct replacement wiper blades, they will come with instructions. Also, you may want to view the videos below for Hook-End wiper blade arms.


How do you remove wiper blade from wiper arm on 1991 Ford Aerostar?

The 1991 Ford Aerostar has the most common hook-end wiper arms. See sources and related links below for installation videos. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.


How do you remove and install wiper arms on a 1994 Plymouth Voyager?

Many Plymouth Voyagers have the J-hook wiper arm. A person has to bring the old blade up, push it down over the hook, and then up over the hook. Next put the new blade over the hook, push it down so the hook goes through the hole, and then back in to catch the bar.


How do you replace wiper blades on 1998 grand voyager?

Many wiper blades on a 1998 Grand Voyager are held in by a clip. Push the clip towards the arm, and then push the blade back. When the wiper blade is free from the hook, disconnect it from the arm by pushing the wiper down the arm a few inches. It will be free and easy to remove. Now remove the old wiper, and prepare the new wiper. Aim the hook towards the new wiper, it will go over the top. Push the blade towards the end of the arm, until it clicks. Once it clicks, it is in the correct position.


What are the release dates for Supreme Justice with Judge Karen - 2013 Hook in Arm?

Supreme Justice with Judge Karen - 2013 Hook in Arm was released on: USA: 9 October 2013


How do you remove 1990 Dodge Dynasty wiper blades?

Lift wiper arm off glass. Press little tab where wiper frame is inserted into wiper arm. Pull out of hook. Sometimes you have to rotate and/or flex the blade a little bit in order to make clearance to remove the blade. See video in related links below.


How do you remove windshield wipers from wiper arm on 1986 gmc sierra pickup?

The 1986 GMC Sierra has the most common hook-end wiper arms. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.


How do you remove the wiper blades from a 2001 elantra?

1.Lift the arm assembly away from the glass for clearance.Press in on the lock tab and push the blade assembly down the wiper arm out of the hook at the end.Squeeze the blade element tabs tightly and pull the element out of the metal frame.