Methylene Chloride.Carefully, with a methylene chloride based paint stripper. Or use a high-quality epoxy labeled "for Plastic"ANS 2 - You should use IPS Weld-On 4 or 16. These are formulated for Lexan construction and repairs. -Available at any 'Plastic' or fibreglass store.
Paint remover typically contains strong acids or bases to break down paint molecules. These strong acids can include methylene chloride, which is a powerful solvent used in many paint strippers. Therefore, paint remover is considered to contain strong acids rather than weak acids.
Methylene chloride is used in dry cleaning as a solvent to remove stains and dirt from fabrics. It is effective at dissolving oils and greases while being gentle on delicate fabrics. Additionally, it evaporates quickly, leaving minimal residue on the clothing.
When handling methylene chloride, it is important to wear protective gloves, goggles, and a respirator to prevent skin contact, eye irritation, and inhalation of harmful vapors. Work in a well-ventilated area and avoid using the chemical near open flames or heat sources. Additionally, store methylene chloride in a cool, dry place away from incompatible materials.
The two quickest methods to remove paint from metal are, the use of heat, and chemical strippers. A propane torch or heat gun will soften the paint so that it can easily be scraped off. This may generate toxic fumes, though, and should be done outside or with a respirator. There is also a risk of injury due to the heated metal. Chemical strippers are available on the market for removing paint from metal as well. The active ingredient in many such products is methylene chloride, which is very toxic and should be used with caution in a well ventilated area. There are also paint strippers that do not contain dangerous methylene chloride and work extremely well. Peel Away 7 or Smart Strip Paint Remover are the best to remove paint from metal especially if there are multiple layers of old paint. These products are available at stores like Sherwin Williams or Home Depot.
It depends on the paint that was used to paint the tiles originally, but usually a methylene chloride stripper will take off an epoxy used to paint tiles and not harm the tiles. Use strippers only in a well ventilated area with protective clothing and eyewear.
Professional people use some chemical for paint removal in London and I will advise you to get in touch with an expert for this.
Copper chloride is not typically used as a tree killer. It is primarily used as a fungicide or herbicide in certain applications. Using copper chloride to kill a tree can be harmful to the environment and not an effective or recommended method for tree removal. It is best to use appropriate methods or seek professional help for tree removal.
From: http://pol.spurious.biz/dev_zero/caffeine.html Two basic decaffeination processes are used in the U.S.: water extraction and direct solvent extraction. In the water extraction process, the coffee beans are steamed and then soaked and rinsed, allowing the caffeine to diffuse from the beans into the water, using no artificial chemicals. In the direct solvent extraction process, decaffeination is accomplished by direct application of methylene chloride, ethyl acetate or carbon dioxide to the coffee beans. The beans are then steamed to remove the residual solvent, then dried and roasted. Methylene chloride received a great deal of attention when it was found to be an animal carcinogen when given by inhalation. Yet, the administration of methylene chloride to mice in drinking water (which more closely resembles human exposure through coffee drinking) resulted in no adverse health effects. The FDA continues to permit the use of methylene chloride to decaffeinate coffee because it has determined that any potential health risk is so low "as to be essentially non-existent" (FDA, 1985).
A student can use a stain called methylene blue to make nuclei more visible under a microscope. Methylene blue is commonly used in biology and histology to stain cells and highlight structures like nuclei.
The problems surrounding acesulfame K are based on the improper testing and lack of long-term studies. Acesulfame K does contain the carcinogen methylene chloride. Long-term exposure to methylene chloride can cause headaches, depression, nausea, mental confusion, liver effects, kidney effects, visual disturbances, and cancer in humans. There has been a great deal of opposition to the use of acesulfame K without further testing, but at this time, the FDA has not required that these tests be done.
my mother had that happen to her and someGuy told her to use regular white tooth paste rub it on the area and then wipe it off ...it worked WORKED it was red paint too...