Engine control module
The engine computer (pcm) controls the injector pulse. It looks at numerous sensors and switches to calculate pulse width
The engine computer.
The engince control computer. Why ?
The ecm does with input from various sensors.
1990 ford ranger 2.3 no injector pulse what causes this
200 Nissan exterra v6 have spark and injector pulse no power to fuel pump
tools u can use are a noid light....or an injector pulser ''TOOL''
Injector pulse is controlled by the ECU. Injectors Have a red wire that is hot. Black wire is controled by computer ground...
Pulse width is the time in milliseconds that the injector is energized, the duty cycle is the percentage of on-time to total cycle time
The ECU. (COMPUTER)
In a 1986 Toyota MR2, the fuel injector pulse is controlled by the engine's electronic control unit (ECU), which manages the timing and duration of the injector's operation based on engine conditions like RPM, temperature, and throttle position. If you're troubleshooting injector pulse issues, you can check the ECU for fault codes, inspect the wiring and connectors for damage, and use a multimeter or oscilloscope to test the injector's voltage and pulse signal. Proper fuel supply and pressure should also be verified to ensure the injectors function correctly.