Brinnnggggg! Use onamotpoeia, to portray the effect of the verb.
The problem with the wording in "Startled by the noise, the alarm clock was knocked on the floor" is that it makes it sound like the alarm clock was startled. It would be better written: "Startled by the alarm clock, I knocked it on the floor."
An alarm clock converts electrical energy into mechanical energy to move the hands or display the time. It also transforms electrical energy into sound energy to produce the alarm noise.
yes. the same noises can be used as alarm clock alerts.
Both examples need commas after their modifiers, as well as some other punctuation that isn't currently allowed in Wiki questions. Other than that, the first example is correct. It implies that you were standing on the chair, which is a reasonable action for you to take when you want to reach something high. The second example is incorrect. It implies that the alarm clock was startled by its own noise. It's more likely that the person who knocked the alarm clock onto the floor was startled. Example #2 correction: Startled by the noise, I (he/she/etc.) knocked the alarm clock onto the floor.
People say "the bells, the bells" when they hear a loud noise because it is a common expression used to convey surprise or alarm at the loudness of the sound, similar to the ringing of bells.
bell
I HAVE 92 LSC ALSO, TRIPMINDER IS MAKING THAT NOISE WHEN IT GOES BAD, THERE IS A FUSE ON THE FUSE PANEL BY DRIVERS SIDE LEFT LEG, REMOVE......NOISE WILL STOPS , OF COURSE TRIPMINDER/CLOCK WILL NO LONGER WORK, I FORGET FUSE POSITION NUMBER, ITS NOTED IN OWNERS MANUAL.
You didn't describe the type of clock radio or age so the following are just guesses to apply to your situation. Unplug the radio from the wall. If the noise still persists, it isn't the radio, but something else around the radio. Is the clock and old fashioned mechanical clock. If so it could be the clock motor. The radio could still be on when you think it is off. This is possible in some models where the on/off switching is electronic rather than mechanical. There is something living inside the clock radio. Sound will persist even when unplugged. There is a strong electromagnetic field in vicinity of radio which is causing a resonance frequency in the radio electronics even when off. Move the radio to another part of house and see if sound changes.
57 decibels is about the noise that a high speed toothbrush makes or the low setting on an alarm clock or telephone. It can be loud enough to wake you up.
A clock is the answer
Common sounds heard in the morning include birds chirping, alarm clocks ringing, people talking or moving about, traffic noise, and the sound of breakfast being prepared.
It is RFI generated from the ignition system. dI/dT very fast di/dt is rf