0
What else can I help you with?
What may be the trouble if a capillary tube unit frosts down the suction tube?
If a capillary tube unit frosts down the suction tube, it may indicate a restriction in the capillary tube, improper refrigerant charge, or a problem with the system's airflow. It is recommended to check for any blockages in the capillary tube, ensure the system has the correct refrigerant charge, and inspect the airflow to troubleshoot and resolve the issue.
The height of a liquid in a capillary tube is not dependent on?
the height of a capillary tube is not dependent on
Why mercury falls in capillary tube?
Mercury falls in a capillary tube due to the combination of capillary action and gravity. Capillary action is the tendency of a liquid to be drawn up into a narrow tube against the force of gravity. When the adhesive forces between the mercury and the walls of the capillary tube are greater than the cohesive forces within the mercury, the mercury will move downward in the tube.
What line on the ac unit is the low side and what is the high side?
The high side of an a/c is as follows: The compressor ,the capillary( the capillary is a very narrow tube with an inside diameter about the size of a pencil point. )The cap tube is factory sweated to the return line from the evaporator to cool it down. As soon as this cap tube reaches the coil of the evaporator, the tube is much larger in diameter. This causes the freon to expand and it changes from a gas to a liquid. It is very cold and starts to attract warmth from the room. You will notice a small frost line which will rapidly melt because the freon used in an a/c boils at a lower temperature than the freon in a refrigerator. This sweating will continue to cover more of the evaporator, which is the low side because the pressure drops. When it reaches the evaporator, as the freon leaves the evaporator, it enters the suction line. It then goes back to the compressor where it is pressurized back through the cap tube again. This cycle is repeated again and again. So on the high side,, you have the compressor and the capillary tube and on the low side the evaporator and the suction line. It sounds complicated, but is really a very simple continuous cycle at a very fast speed.
Why is capillary tube fixed in Ostwalds viscometer?
The capillary tube is fixed in the Ostwalds viscometer is for passing the liquid.
What is the function of capillary tube?
The capillary tube is used on the inside of the refrigerators. It is a long copper tubing that is used as a thruster.
Derive an expression for expression for rise of liquid in a capillary tube?
deduce an expression for height of a liquid in capillary tube. also write practical applications of capillary action.
How can you measure the diameter of capillary tube by using vernier caliper in traveling microscope?
To measure the diameter of a capillary tube using a traveling microscope and vernier caliper, place the capillary tube on a flat surface. View the capillary tube through the traveling microscope to measure the external diameter. Then, use the vernier caliper to measure the internal diameter by gently inserting the capillary tube between the jaws of the caliper to get an accurate measurement. Subsequently, calculate the average diameter using the two measurements.
What is a narrow tube that is used as a metering device?
capillary tube
The narrow tube that is used as a metering device is a?
capillary tube.
How can starfish get suction cups?
They don't have suction cups they have tube feet
The rise of water in a narrow test tube is called?
The rise around the edges is called the meniscus, like capillary action this is caused by the adhesion of the liquid molecules to the walls of the container. In a large bore tube like a test tube or graduated cylinder this pulls up the edge and creates a concave meniscus, in a smaller bore tube this actually pulls the liquid toward the top of the tube.
