0
Why is the downward pressure of water at the bottom of a vessel independent of the shape of that vessel?
The downward pressure of water at the bottom of a vessel is determined solely by the height of the water column above it and the density of the water, as described by the hydrostatic pressure equation: ( P = \rho g h ). This means that regardless of the vessel's shape, the pressure at the bottom depends only on how deep the water is, not on the vessel's width or contour. Therefore, as long as the height of the water remains constant, the pressure at the bottom will also remain constant, independent of the vessel's shape.
What else can I help you with?
How a concrete pump push concrete?
Pumps consist basically of pressure vessels and equipments for supplying compressed air.Concrete is delivered in to the pressure vessel and the vessel sealed tightly.Compressed air is then supplied to the top of the vessel which pushes the concrete out through a pipe connected at the bottom.
Certified Pressure Vessel?
Certified Pressure Vessel
What is the surface area of a pressure vessel?
The answer depends on the pressure vessel.
What is the function of the ventral blood vessel of a worm?
Blood vessel on the bottom of a worm Blood vessel on the bottom of a worm
Where is fluid pressure the greatest?
Fluid pressure is the greatest at the deepest point. If the fluid is in different shaped vessels, the pressure is the greatest at the bottom of the vessel no matter what the shape.
A vessel water storage tank of height 12 meters is filled to a depth of 8 meters with water at density 1000kgm calculate the pressure at the bottom of the vessel?
approximately 0.8 bar
What is the pressure detector placed in a vessel to measure the level of a liquid?
A pressure detector placed in a vessel to measure liquid level uses the principle that the pressure at a specific depth in a liquid is proportional to the height of the liquid above it. By measuring the pressure at the bottom of the vessel, the detector can calculate the liquid level. This method is commonly used in industries such as oil and gas, chemical processing, and wastewater treatment.
What is the Pressure exerted by water freezing in an enclosed vessel?
When water freezes in an enclosed vessel, it expands and exerts pressure on the vessel walls. This pressure depends on factors such as the volume of water, rate of freezing, and strength of the vessel. Generally, this can lead to the vessel cracking or bursting if the pressure becomes too high.
How does a vessel implode and what are the factors that contribute to this phenomenon?
A vessel implodes when the pressure inside the vessel becomes greater than the pressure outside, causing it to collapse inward. Factors that contribute to this phenomenon include a sudden change in pressure, structural weaknesses in the vessel, and the material properties of the vessel.
How do you calculate the weight of an empty pressure vessel?
To calculate the weight of an empty pressure vessel, you can determine the volume of the vessel and then multiply it by the density of the material from which the vessel is made. This will give you the mass of the vessel, which you can then convert to weight by multiplying it by the acceleration due to gravity.
What are the main purpose of pressure vessels?
The main purpose of a pressure vessel is to hold gases or liquids at a pressure inside a container different to the pressure outside of the pressure vessel. Usually pressure vessels are made from steel.
What is the meaning of Unfired Vessel?
A pressure vessel that is not in direct contact with a heating flame
