0
What else can I help you with?
The output (signal) of an inductive pulse generator shaft speed sensor is measured in?
The output signal of an inductive pulse generator shaft speed sensor is typically measured in volts. This voltage is generated as the sensor detects the passing of ferromagnetic objects or changes in magnetic fields related to the shaft's rotation. The frequency of the voltage pulses corresponds to the rotational speed of the shaft, allowing for the calculation of speed in revolutions per minute (RPM).
What is difference between output current and pulse current?
It is a language in electronics describing whether the output is a pulse or direct current for any output.
How does a taximeter work?
Taximeters are an electronic piece of equipment that counts the pulses coming from a sensor on the transmission. The signal from the transmission is in the form of a pulse which the meter counts and then determines how far the vehicle has traveled.
What causes a faulty pulse signal on a 89 ford probe?
Pulse signals from what? speed sensor abs wheel sensor fuel pump pressure sensor crankshaft sensor camshaft sensor knock sensor
What is the output from an AND gate if the two inputs each carry a pulse?
The output from an AND gate is TRUE if both inputs are TRUE. If each input is given a pulse, the output will pulse, but only for the time that the two input pulses overlap each other in time. If the input pulses do not overlap, the output will do nothing.This answer assumes that the input pulses are from FALSE to TRUE and back to FALSE. In the reverse case, the output will pulse whenever either input is pulsed and, if the inputs overlap in time, the output will simply be one longer pulse.
What sensor has the most influence on fuel injector pulse width?
oxygen sensor
What is a pulse deficit?
A pulse deficit is the difference in the heart rate and pulse rate when both are checked simultaneously. Pulse deficits are quite often a sign of decreased cardiac output.
Which is NOT a site for a pulse oximetry sensor?
upper arm
What is the limitations of jk flip flop?
When j=1 an k=1 and the clock pulse signal which remain at logic 1, after the output have been complemented once will cause repeated and continue transmission of output. This situation is called "raised condition".To avoid this undesirable operation, the clock pulse must have a time duration which is shorter then the propagation delay through the flip flop.
This arterial pulse weakness can be directly attributed to a decreased?
cardiac output
What is a pulse oximeter or what does it measure?
An oximeter is a device to measure the oxygen saturation level in blood. I believe that a "pulse" oximeter has a sensor to measure pulse as well, though it wouldn't surprise me if some devices not having such a sensor but otherwise looking and working like a pulse oximeter were casually called that too.
Is output of electric fence charger ac or dc?
The output of an electric fencer is a high voltage pulse of DC voltage.
