Non-load-bearing walls support only themselves; they are interior partition walls. They have a single top plate. While non-load-bearing walls might run perpendicular to floor and ceiling joists, they will not be aligned above support beams. As the name implies, load-bearing walls carry the structural weight of your home. Load-bearing walls in platform-frame homes will have double top plates. That is, two layers of framing lumber. Note: all exterior walls are load bearing; I got this from another site.
One must use caution when removing walls, some walls are load bearing. Other items you will find in walls are electrical, and plumbing.Ans 2 -providing you are sensible and careful this can be done -I've personally done many.
No. They are partition walls.
Interior closet walls are typically non-load bearing walls.
Non load bearing walls are walls that the weight of the roof is not supported on. Any wall that runs parallel will roof joists will be non load bearing.
No. a standard Vinyl replacement window will not work in a mobile home unless you do some work to the wall to frame it to the correct size. Generally a mobile homes walls and window openings are a different size than the standard size used in stick built homes.
LOAD BEARING WALLS Walls that must support the dead load of their own weight and the weight of subsequent bearing structural members placed upon them. In addition, load bearing walls must be capable to carry the load of "live" loads that are anticpated to be placed upon the the system without deflection that can degrade or negatively impact structural intergrity. NON LOAD BEARING Walls that are only intended to support themselves and the weight of the cladding or sheathings attached. Non load bearing walls provide no structural support and may be interior or exterior walls. Non load bearing walls must be braced to resist minimum 5 psf lateral loads.
I think because they had varied from the homes.
small with no walls
No.
Woven pictures hung on the walls in the homes of nobles were called tapestries.
To determine load-bearing walls in a building, you can consult the building's blueprints, look for walls that run perpendicular to the ceiling joists, or hire a structural engineer to assess the structure.