2.5 inches
A standard toe board shall be a minimum of four inches nominal in vertical height from its top edge to the level of the floor, platform, runway, or ramp.
The height of a regulation dartboard is 5'8" from the center of the bullseye to the floor, with a toe line at 7' 9.5" inches from the front of the board for steel tip darts.
Height is typically measured from head to toe, starting at the highest point of the head and extending down to the feet. This provides an accurate representation of a person's total vertical stature. Measuring from the shoulders to the toes would not give a true indication of overall height.
A toe board must typically be at least 4 inches high above the platform to effectively prevent materials from falling off the edge. This requirement may vary depending on specific regulations or industry standards, so it's essential to consult the relevant safety guidelines for your location or industry. Toe boards should be securely mounted and able to withstand a force to ensure safety.
The toe bar on a scaffold helps prevent materials and tools from falling off the platform and creating hazards for workers below. It also provides additional support and stability to the scaffold structure.
On a 1997 Ford Explorer : The toe board is the angled piece between the floor and the firewall in front of the driver and the front passenger
The diameter is the height: the tip to the toe of an object.
It is called a "toe grab".
none
the toe-touch should be at least up to your waist but if it isn't then you will need a little practice.
It's called hyper extension. CHEERS
9 squares on a tic tac toe board