0
What else can I help you with?
What is the verb word for operation?
The verb form of "operation" is "operate." To operate means to control or manage the functioning of something, such as machinery or a system. It can also refer to conducting a medical procedure or performing a specific task.
What is timing and control in computer architecture?
Timing pulses are used in sequencing the micro-operations in an instruction. For example, when LDA instruction is executed, the memory is read operation is performed in timing pulse T1 and memory writer operation is performed in timing pulse T2. Now the combination of the signal LDA and T1 can be used as a control signal for performing read operation. Similarly, the combination of the signal LDA and T2 can be used as a control signal for performing write operation.A master clock generator is used for controlling the timing for all register in a computer system. A state of a register cannot be changed by a clock pulse until it is enabled by the control signal, which are generated in the control unit and provide control inputs for multiplexers, processor register, and micro-operations. The control organization is of two types; hardwired control and micro-programmed control.Hardwired ControlIn a hardwired control, the control signals are generated by using the collection of combinational circuits. The main advantage of the hardwired control is that, it can be optimized to produce a fast mode of operation. Whenever a change or modification is to be done in the design, then the wiring among the various components needs to be done. Micro-Programmed ControlIn a micro-programmed control, a control memory is used for storing control information which is also programmed for initiating the sequence of micro-operations. Whenever any change or modification is required in the design, it can be done by updating the micro-program in the control memory.
What is the best definition of a Supervisor?
an individual who has the safety responsibility for workers who directly report to him/her within the organization and for the safe operation of facility or programmatic machinery and equipment under his/her control
What are the features and compatibility of the universal Liftmaster remote control?
The Liftmaster universal remote control features compatibility with most garage door openers and offers convenient wireless operation. It can be programmed to work with multiple devices and provides secure access to your garage.
If a computer cannot feel or think on its ownso how can it control a rocket in space?
It is wired and programmed to do it. I think. It is wired and programmed to do it. I think.
Does a transmission control module need to be programmed?
Yes, a transmission control module (TCM) typically needs to be programmed or calibrated after installation or replacement. This programming ensures that the TCM is correctly configured to communicate with the vehicle's engine control unit (ECU) and other systems. Proper programming allows the TCM to optimize transmission performance and adapt to the specific characteristics of the vehicle. Some vehicles may also require reprogramming after software updates or changes in driving conditions.
What is fault code P1613 on citroen C5?
Engine control module (ECM) programming malfunction. This means that either it is incorrectly programmed or not programmed.
Does your impala have to be programmed by a dealership when replacing the body control module?
yes
What is the function of the crossover valve in a hydraulic system?
The crossover valve in a hydraulic system is used to control the direction of fluid flow between different sections of the system, allowing for the efficient operation of hydraulic machinery.
What is a control unit?
A control unit in general is a central (or sometimes distributed but clearly distinguishable) part of whatsoever machinery that controls its operation, provided that a piece of machinery is complex and organized enough to contain any such unit. ...All steering devices with connections to the parent device and which can steer, direct, or change its operational parameters. This can be done by automatic, semi-automatic or manually operated commands.Source: google.com
What is unit control?
A control unit in general is a central (or sometimes distributed but clearly distinguishable) part of whatsoever machinery that controls its operation, provided that a piece of machinery is complex and organized enough to contain any such unit. ...All steering devices with connections to the parent device and which can steer, direct, or change its operational parameters. This can be done by automatic, semi-automatic or manually operated commands.Source: google.com
Do you do a replacement remote control for squawkers macaw?
yes--where can i get a replacement ?
