answersLogoWhite

0

Home supply stores have long, easily cut pieces of foam insulation. It's darker in color and is tube shaped like the pipes it's used to insulate. The stuff is cut down it's length so that installation simply involves pulling it open and slipping it over the pipe. That's after it's cut to length of course. Most installers using the stuff run tape along the slit where it was cut to close the gap and seal it.

Answer

Insulating alone won't protect water lines from freezing. Heat tape is the best way to go. If it's possible to rerun the main water line so more of it is up inside the under belly above the insulation then you will have less that needs a heat tape.

ANS 2 - If temperature drops below -5 overnight, answer 1 is useless. The second answer is by far the best.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

What are some alternatives to heat tape for insulating pipes?

Some alternatives to heat tape for insulating pipes include foam pipe insulation, fiberglass pipe wrap, and electric pipe heating cables. These options can help prevent pipes from freezing and bursting during cold weather.


Are lead pipes safe for use in plumbing systems?

Lead pipes are not considered safe for use in plumbing systems because lead can leach into the water supply, posing health risks such as lead poisoning. It is recommended to replace lead pipes with safer alternatives.


What kind of maintenance is required for flatbed trailers?

A flatbed trailer, also referred to as a Utility trailer, or a Cargo trailer has the general use of hauling anything from dirt bikes to drain pipes. The trailer is manufactured in multiple sizes. The maintenance needed, is to keep the trailer clean from debris, disposing road salt, dead animal debris and tar. Keep the trailer waxed and the joints and axles greased for continued easy maintenance procedures.


How can I create a DIY bike cargo trailer?

To create a DIY bike cargo trailer, you will need a sturdy frame, wheels, and a way to attach it to your bike. You can use materials like wood, metal pipes, or PVC pipes to build the frame. Attach the wheels securely and make sure the trailer is balanced and stable when attached to your bike. You can also add a platform or box to hold your cargo. Customize it to fit your needs and make sure it is safe to use on the road.


How many Gas line pipes 42 inch and 52 inch length 12 m can load in a trailer which has an perimiter of 500 Inch?

6


Where does the energy come from to warm up the pipes behind the fridge?

The energy to warm up the pipes behind the fridge typically comes from the compressor in the refrigerator, which circulates a refrigerant through the coils. As the refrigerant moves through the coils, it absorbs heat from inside the fridge, releasing it behind the fridge and warming up the pipes.


Are lead gas pipes dangerous?

Yes, lead gas pipes can be dangerous because they can release lead particles into the air, which can be harmful if inhaled. Lead exposure can cause a range of health issues, especially in children and pregnant women. It is advisable to replace lead gas pipes with safer alternatives to minimize health risks.


Why do tail pipes on pickup trucks come out to the side and not the rear?

shorter pipes mean less cost to manuf. = mo profit. And it looks sporty. My truck's tailpipe is bent 90 degrees with the tip extending another 12-14 inches out behind the right rear tire. The pipe would be the perfect length without that last bend and if it exited straight out of the vehicle's rear. Truck tailpipes exit the side because when towing a trailer rear facing pipes can cause exhaust fumes to enter the passenger compartment by hitting the trailer and "backflowing" up the sides of the truck and into the passenger area. Also, rear facing pipes increase the potential for harmful exhaust gases to build up in the trailer, especially bad if you are towing a camper.


Where is the water hose hookup on a 1985 komfort trailer?

There should be a sticker on the side that says freshwater hook up. if that is gone than there should be 2-4 pipes on one and it shud be the far right. Not to sure off the top of my head but its close to the middle depending on how long the trailer is.


Why is iron not used to make water pipes?

Iron is not commonly used to make water pipes due to its susceptibility to corrosion, especially when in contact with water and oxygen. This corrosion can lead to rust formation, which not only degrades the pipe material but can also contaminate the water supply. Additionally, iron pipes can be heavy and difficult to install, making alternatives like PVC and copper more favorable for plumbing applications.


How can I create a bike trailer DIY?

To create a DIY bike trailer, you will need a sturdy frame, wheels, hitch, and a platform for carrying items. You can repurpose materials like metal pipes or wood for the frame, and attach wheels securely. The hitch should connect the trailer to your bike safely. Customize the platform size and shape to fit your needs, and ensure everything is securely fastened before use.


How do you replace quest water pipes through single wide 1995 Palm Harbor trailer?

You would have to lift the floor covering and the main floor boards over the pipes. Most mobiles have the pipes running in one particular area for simplicity. ie Bathroom, water heater and kitchen sink, all in a line. -If that's the case, you cut through about 2 foot wide section of floorboards down the length you want to remove.