0
To fence 20 hectares, you first need to convert the area into square meters. One hectare is equal to 10,000 square meters, so 20 hectares equals 200,000 square meters. Assuming a square configuration for simplicity, the perimeter would be the square root of the area multiplied by 4. Therefore, the perimeter is approximately 1,414 meters, meaning you would need about 1,414 meters of barbed wire to fence the area.
What else can I help you with?
Where can one use some barbed wire for a fence?
Barbed wire for fences is typically found either above the fence to keep people from climbing over or in 3 rows to prevent going through the fence. The entire purpose of barbed wire is to either keep something in or someone out.
What effect do barbed wire have on American history?
Barbed wire caused many problems with the cattle industry in the late 1800's. Before barbed wire, ranchers could take their cattle to watering places freely without conflict. When ranchers decided to put up barbed wire and take away others' rights to the water, their were range wars.
Why didnt farmers like barbed wire fences at first?
Farmers initially disliked barbed wire fences because they restricted the movement of livestock and wildlife, leading to conflicts over land use. Additionally, barbed wire was seen as a symbol of enclosure, which went against the open-range practices that many farmers valued. Some also feared that it would damage the landscape and create barriers to traditional grazing routes. Overall, the introduction of barbed wire challenged established farming practices and raised concerns about property rights and access to resources.
How did the cattle boom come to a end?
Cattle drives soon ended in the late 1800's to the early 1900's because of fierce winter storms, barbed wire, drought, overgrazing, and the near extinction of the population of Longhorns originating from Spain and developed in the wilds of southwestern America.
Dam how many meters?
lolololololololo
How many fence post needed to fence 18 meters?
It depends on what kind of fence you wish to put up. For example, an electrified barbed wire and steel post fence would only require about three posts. But a wood plank and wood post fence would require about five or six.
Where can one use some barbed wire for a fence?
Barbed wire for fences is typically found either above the fence to keep people from climbing over or in 3 rows to prevent going through the fence. The entire purpose of barbed wire is to either keep something in or someone out.
Rahul is building a straight fence by stringing wire between posts 25 meters apart If the fence is 100 meters long how many posts?
4
How many rolls to do a five strand barbwire for 180 acres?
Well, first you need to know the length of barbed wire in a roll. Then you need to know the perimeter of the fence (in feet or metres) you are going to build around that 180 acres. Then, calculate it this way: (length of barbed wire in one roll) x (perimeter of fence of 180 acres) = (total length of wire needed for "n" ft. (or m) of fence perimeter of one strand) (total length of wire needed for "n" ft.(or m) fence perimeter of one strand) x 5 = (Grand total length of wire needed to fence 180 acres) (Grand total length of wire needed to fence 180 acres) / (length of barbed wire in one roll) = (# of rolls needed for a five-strand barbed wire fence for 180 acres)
To fence 80 acres how many t-post and wire?
80 acres is 880 x 440 feet. Depends on how many cattle and how rough they are on your post settings. Most people around here in Oklahoma put their t-posts roughly 16' apart. This will take 164 posts. A roll of barbed wire will usually run a quarter of a mile of fence. So on a typical 5 wire fence it will take 30 rolls of barbed wire.
A straight fence is made from a horizontal wire held up by vertical posts 3 meters apart The fence is 12 meters long How many posts are there?
5
How many square meters of space are inside a rectangular fence that is 5 meters long and 7 meters wide?
5*7=35
How many fence are in a pound?
The number of fence in a pound depends on the type and size of fence being measured. There is no standard conversion of fence to pounds as they are measured in different units: length (feet, meters) for fence and weight (pounds) for pounds.
If a wooden fence is to be built around a 24 meter by 32 meter lot how many meters of fencing will be needed and If the wood for the fence costs 21.25 per meter what will the wood for the fence cost?
you'll need 112 meters of fencing and it'll cost about $2,380.00 .
How many pages does The Barbed Coil have?
The Barbed Coil has 704 pages.
Where can I get a barbed wire fence repair in Memphis TN?
Check on Angies list online. You will be able to see reviews of people in your area. This way you can find the best person for the job. There are many to choose from but you want the best one.
How many metres is one ton of barbed wire?
The length of barbed wire in one ton can vary depending on the gauge and type of wire used. On average, one ton of standard barbed wire can yield approximately 1,200 to 1,500 meters. However, this can differ based on the specific design and thickness of the wire. It's always best to check the manufacturer's specifications for precise measurements.
