0
What else can I help you with?
In a deck of cards the king is holding a sword in three of the suits what is he holding in the other one?
he's holding an axe
Did Benito Mussolini drink?
There are film clips where you can see Benito Mussolini drinking the famous Italian wines. I have not see any other pictures, clips or references to him drinking any other alcohol. Most Italians did not drink hard liquour. They drank Italian wine with their meals.
What is your stand for?
My stand is mostly for holding up paintings, although it can have other applications.
Do you need to remove any other nuts other than the wheel to replace a front rotor on a 2000 Mercury Sable?
Only the bolts holding the caliper on it.
Why did a colonial farrier use screws?
A colonial farrier used screws primarily for their practicality and versatility in metalworking. Screws provided a reliable method for fastening parts together, such as horseshoes to hooves or components of various tools. Their ability to create strong, adjustable joints made them essential for ensuring the durability and functionality of equipment used in horse care and other tasks. Additionally, screws were easier to use than traditional nails in some applications, allowing for better repairs and modifications.
Where are the memory slots at for an hp nc6400?
One is on the bottom of the laptop directly in the middle secured by one screw and RAM clips. The other is below the keyboard which is secured by three screws on the bottom of the laptop, clips holding the keyboard, then the usual RAM chip clips on either side.
How do you remove headlight assembly 2006 jeep commander?
To remove the headlight assembly on a 2006 Jeep Commander, first, open the hood and locate the headlight assembly. Remove the screws or clips securing the assembly, typically found at the top and possibly on the sides. Disconnect the electrical connector by pressing the tab and pulling it out, then carefully pull the headlight assembly out of the housing. Repeat for the other side if necessary.
How do you remove the headlight located on a Ford Fiesta?
You have to remove the front grill. Gently pull it upwards and then swing it outwards towards you and pull free, but be careful the clips at the bottom are rather fragile and can break easily. There are 3 large cross headed screws one at the top of the heal light unit which screws in to the inner wing of the car, the other two are located behind where the grill was located. With the screws removed unplug the headlight from the wiring harness and then holding the headlight unit swing it outwards and pull it free of the car. Refitting is the reversal of the above procedure. Note you might have to have your headlights realigned afterwards. TIP: Mark the headlight unit with a pencil so that you can make sure it goes back in in exactly the same position. Hope this helps.
How do I Remove headlight assembly 1992 gmc sierra?
The entire front grill must be removed, by removing (8) 7mm screws, parking light assemby must be removed to reach 7mm screw behind it. There are( 4) T15 maybe T10 screws holding each assembly. Two of the 7mm screws holding grill are in center one just above bumper and other towards the top, you'll need an extension in order to reach them through grill. Unplug parking lights and lift grill up and out to remove. You will now be able to see the (4) 10mm screws holding headlight assembly in place.
Any Help do-it-yourself replace headlight motor for 240sx Nissan?
To replace the headlight motor on a 240 SX Nissan, unhook the positive cable on the battery first. Then take a picture of the headlight motor before taking the old one off. Remove the wires and screws holding the other motor in place, then place in the new motor, tighten the screws, and hook up the wires while looking at the picture. Connect the battery cable.
How do you remove headlight door from 1995 Ford F-150?
To remove the headlight door from a 1995 Ford F-150, first, open the hood and locate the screws or clips securing the headlight assembly. Remove these fasteners using a screwdriver or appropriate tool. Once the assembly is loose, gently pull it forward to detach the headlight door. Be careful not to damage any wiring or other components while removing it.
How do you change a headlight in a 1991 Chrysler New Yorker?
There are four screws you need to take off. Only take the outer four corner ones. There are two other screws on the left and right of the head light leave those as is. Anyways just unscrew the four screws and pull the headlight off..and change the headlight!
How do you change the headlight on a Mazda b 2000?
Open hood place latch in place.Remove the two screws that hold the LHS marker light.Behind that are two more screws remove those.Next go to the RHS and do the same.Now there are screws that run on top of the grill at the metal remove all the screws on top.Next in the honey comb part of the grill center area there are aproximately 3 screws remove those.The grill should pull forward if not double check for any remaining screws not removed.Once the grill is out and the marker lights can be left hanging and let the grill hold on those or lean.Now this allows you to remove the 4 screws with the chrome retaining ring around the headlight itself and disconnect the plug behind the headlight and remove burned out light.Install is reverse of this and the small screws holding the chrome around the headlight are kind of annoying to reinstall so take your time and get one started and then do the other 3 then tighten.Once light is in plug connector on headlight then reinstall grill and marker lights.Test your headlight before buttoning up things to make sure it works to save the hassle.
Where are the headlight adjustment screws for on a 2002 Malibu?
open hood, remove the little plastic/rubber cover above each headlight, one will be right on top the other is just below behind the headlight.
HOW TO Remove headlight ON gsxr 600?
be more specific. what year is it? on my bike the headlight assembly sits in 2 grommets that are part of the bracket and also bolting to the gauge cluster assembly. 1 grommet on the left the other on the right. than, in each top left and right corner of the headlight shoud be Phillips or 7mm metric screws. they bolt into the upper fairing, holding the light flush.
How do you remove the headlights side marker and turn signal lights from a 1991 Ford Mustang?
I have a 93 stang and have replaced all the front lights. I find it easiest to take the headlight out first. Unplug the headlight bulb from the housing and move it out of the way. The headlight is held in place by three bolts. 7/16" I think. Once you get the headlight out I find it easier to reach the bolts for the other lights. The side marker and turn signal lights each have two bolts holding them in. . Hey Alan==They all have screws holding them in. Find them and remove them. GoodluckJoe
How do you adjust the headlight angle of 2004 Subaru Outback wagon?
There are two screws on the back of each headlight housing. One adjusts up and down, the other side to side.
