0
What else can I help you with?
Which pyramid is the pyramid of Khafra?
The pyramid of Khafre is the second pyramid to be built. It is slightly shorter at 430ft than the great pyramid of his father Khufu. In pictures it always looks taller because it was built on higher ground. It is the pyramid with some of its casing stones left at the top.
Where is the main entrance in the pyramid of Khufu?
The main entrance to the Pyramid of Khufu, also known as the Great Pyramid of Giza, is located on the northern face of the structure. It is situated about 17 meters (56 feet) above ground level. This entrance leads to a series of internal passages and chambers within the pyramid, including the King's Chamber and the Grand Gallery. The original entrance was likely sealed with stones, and the current entrance was created later by explorers.
How tall is The Pyramid Of the Magician?
the piramid of the magician is 90 feet tall (27 meters)
What is the length of one side of the Great Pyramid at Khufu?
The length of one side of the Great Pyramid of Khufu, also known as the Pyramid of Giza, is approximately 230.4 meters (756 feet). This measurement can vary slightly due to the erosion and restoration over the centuries. The pyramid originally stood at about 146.6 meters (481 feet) tall, making it the tallest man-made structure for over 3,800 years.
If the Pyramid has a square base that measures 12 meters and the pyramid stands 17 meters tall what would be the volume of the pyramid?
VPyramid = (B*h)/3 B = base area = 12 x 12 (since it's a square) = 144 m2h = 17 metersV = (144 m2 * 17 m)/3V = 816 m3
What is the ideal mechanical advantage of a lever 7 meters long and 3 meters high?
The ideal mechanical advantage of the bar is 5.
What is the mechanical advantage of a ramp that is 10 meters long and 2 meters high?
5J because 10/2=5
What is the mechanical advantage of a 15 meter ramp that rises 3 meters?
It is 15/3 = 5
What is height of ramp that is 10 meters long with mechanical advantage of 5?
The mechanical advantage (MA) of a ramp is calculated as the ratio of the length of the ramp to its height. Given a ramp length of 10 meters and an MA of 5, the height can be calculated using the formula: height = length / MA. Thus, the height of the ramp is 10 meters / 5 = 2 meters.
What is the mechanical advantage of a lever that has an input arm of 3 meters and an output arm of 2 meters?
The mechanical advantage of a lever is calculated by dividing the length of the input arm by the length of the output arm. In this case, the mechanical advantage would be 3/2, which simplifies to 1.5. This means that for every 1 unit of effort applied to the input arm, the lever can lift 1.5 units on the output arm.
Which pyramid is the pyramid of Khafra?
The pyramid of Khafre is the second pyramid to be built. It is slightly shorter at 430ft than the great pyramid of his father Khufu. In pictures it always looks taller because it was built on higher ground. It is the pyramid with some of its casing stones left at the top.
What are the dimensions of the biggest pyramid?
The Great Pyramid of Giza or Pyramid of Khufu is world's largest pyramid. It is located in the famous Pyramid complex of Giza, Egypt. It had an original height of 146.5 meters which has now reduced to 138.8 meters. Its base is 230.4 meters wide.
How tall is the great pyramid?
the Great Pyramid is480.94feet tallthe great pyramid is 455 feet tallthe great pyramid is about 215 meters tall in they ancient time480 feet tall or 146,6 meters [original height]
What is the mechanical advantage of a 5 meter ramp lifting an object to a height of 0.75 meters?
MA = 5 / 0.75 = 6.67 Essentially, its the reciprocal of the sin of the ramp angle
A pulley system is used to lift a 2000 newton engine up a distance of 3 meters How much force will the operator have to apply if the mechanical advantage of the pulley system is 4?
A pulley system is used to lift a 2,000 newton engine up a distance of 3 meters. How much force will the operator have to apply if the mechanical advantage of the pulley system is 4? mechanical advantage = 500 newtons.
How do you calculate the ideal mechanical advantage of a lever?
It's 1. IMA = Distance in / Distance out. A single pulley doesn't do anything toward mechanical advantage, it changes the direction of the force. Not always. A single-axeled pulley (the typical pulley) has an IMA of 1, having one axel. If there was a second axel, then the IMA would = 2, so on and so forth. The easy way to do it is IMA = # of axels.
Which is taller the great pyramid or Cairo tower?
The Great Pyramid is 139 meters, and the Cairo Tower is 187 meters tall. So.. the Cairo tower is.
