djapth
a solid
they probably had roads that connected from different civilizations. PUT 2 AND 2 TOGETHER, BOB!
united nation connected they help refugees comps
Caesar was Pompey's Father- In -LawPompey was a partener and the third part of a triumvirate along with Julius Ceasar and Crassus.Pompey was also Caesar's son-in-law as he was married to Caesar's daughter.
The provided faster and easier transport without you needing to take your own wagon.
IRQ Ports 2 & 9 -Taylor
The default IRQ for COM2 is typically 3, while for COM4, it is usually 5. These IRQ settings allow the operating system to manage hardware interrupts for the respective serial ports. However, these values can sometimes vary based on the system configuration and settings in the BIOS. Always check your specific system documentation for accurate IRQ assignments.
If you are getting an IRQ conflict after installing a new HW/SW you can see whats wrong by seeing IRQ settings of all the installed devices in the machine. To view your current IRQ (Interrupt Request) assignments in a Windows XP machine you can open Device Manager. Click on Start, click on Control Panel. -> System -> Hardware tab -> Device Manager button -> In Device Manager, select View from the toolbar and then click Resources by Type. Clicking on the Interrupt Request (IRQ) you can find IRQ settings for various devices in the computer. If you see a conflict. You can right click on that device and go to Properties. Under Resources tab you can see the IRQ settings among other properties. Here for a conflicting device you can deselect the Use Automatic Settings option. After this you can select a non-conflicting configuration from the pull down box and save by pressing OK. For some system devices the operating system may not allow you to change the settings.
In the context of computer systems, IRQ (Interrupt Request) lines are used by hardware devices to communicate with the CPU. However, there might be instances where you'd prefer certain devices not to use IRQs. If you wish to prevent a PCI (Peripheral Component Interconnect) device from using an IRQ, you generally have to go through the system's BIOS (Basic Input Output System) settings. The BIOS interface varies among manufacturers, but usually, you can access it by pressing a specific key (like F2, F10, or Del) during the system startup. Once in the BIOS settings, look for options related to IRQ assignments for PCI devices. This setting might be under different menus based on the specific BIOS version. Once located, you can change the IRQ settings to manual and then disable the IRQ for the specific PCI slot. Remember that changing BIOS settings should be performed with caution, as incorrect configurations can lead to system instability. Always ensure you understand what each setting does before making adjustments. Also, refer to your motherboard's manual for specific instructions.
LTP1 should use IRQ7.
By default, the IRQ for the floppy disk controller is IRQ 6.
By default IRQ 7 is assigned to LPT1.
From: http://www.techadvice.com/tech/C/ComPort_TS.htmCom1, IRQ 4, address: 3F8Com2, IRQ 3, address: 2F8Com3, IRQ 4, address: 3E8Com4, IRQ 3, address: 2E8
IRQ 1 is used exclusively for the keyboard controller.
IRQ 1
IRQ 0 - System timer. IRQ 1 - Keyboard. IRQ 2 - Cascaded signals from IRQs 8-15. IRQ 3 - COM2 (Default) and COM4 (User) serial ports IRQ 4 - COM1 (Default) and COM3 (User) serial ports IRQ 5 - LPT2 Parallel Port 2 or sound card IRQ 6 - Floppy disk controller IRQ 7 - LPT1 Parallel Port 1 or sound card (8-bit Sound Blaster and compatibles) IRQ 8 - Real time clock IRQ 9 - Free / Open interrupt / Available / SCSI. Any devices configured to use IRQ 2 will actually be using IRQ 9. IRQ 10 - Free IRQ 11 - Free IRQ 12 - PS/2 connector Mouse. IRQ 13 - ISA / Math Co-Processor IRQ 14 - Primary IDE. If no Primary IDE this can be changed IRQ 15 - Secondary IDE These are just a set of standard IRQs. For much more detail check our Ralf Brown's list located at http://www.cs.cmu.edu/~ralf/files.html
The major system resources to consider are the I/O port address, memory addresses, IRQ, and DMA settings.