0
From my research...the're basically the same phenomenon. Some are larger than others, but I, think, they both tap the "Aether", "Zero-Point" or "Vacuum" energy, since even Plasma Physcists can't explain why the 10,000 + Deg temperature is so high. Zerwell www.zerwellenergy.com
What else can I help you with?
What was the precision of Tycho Brahe's measurements in Denmark?
Tycho Brahe (and his assistants) recorded measurements at his observatory on the island of Ven with an accuracy of up to 4 seconds of arc. Most of his measurements were angular measurements between celestial objects (between stars, between planets and stars and between planets).
Was Joan of Arc a tart?
No, Joan of Arc was not a 'tart.'
What do you mean by arc?
An arc is a part of the circumference of a circle.
The Maid of Orleans was another name for .?
Joan of Arc was known as the Maid of Orleans.
An arc blast is the byproduct of an arc fault and it produces a massive pressure wave which is dangerous as the arc flash.?
True.
How does a plasma torch work?
A plasma torch works by generating an electric arc between two electrodes, creating a high-temperature plasma as gas is ionized. This plasma can reach temperatures of several thousand degrees Celsius, making it capable of melting or cutting through various materials. In industrial applications, the gas, often argon or nitrogen, is injected into the torch, where it becomes ionized, allowing for precise control of the heat and energy output. The resulting plasma jet can be directed to perform tasks such as welding, cutting, or surface treatment.
What is the difference between the center of an arc and the midpoint of an arc?
there is not much difference
What is the difference between Arc tan and arc tan?
There is no difference in meaning between the two. It is usually spelled in lowercase, though (arc tan, or arctan).
Is plasma cutting cleaner then a torch cutting system?
plasma arc cutting (PAC) systems were much less expensive.Plasma cutting systems can be either plasma cutting tables or handheld torches. A larger, industrial plasma cutting table will obviously cost more
What is difference between arc and Arc?
Nothing it just has a capital letter
In a circle what is the difference between a central angle and an arc?
In a circle what is the difference between a central angle and an arc?Read more: In_a_circle_what_is_the_difference_between_a_central_angle_and_an_arc
How much is temperatare on plasma cutting arc?
how much is temperatare on plasma cutting arc
How to Use a Plasma Cutter?
A plasma cutter is a device that uses compressed air or an inert gas blown through a high speed nozzle to cut metal. As the inert gas or compressed air is blown out of the nozzle, an electric arc is formed from the nozzle to the surface of the material being cut. Some of the inert gas or compressed air is converted into plasma as it touches the material being cut, and the heat from this plasma is used to cut the metal. There are two types of plasma cutters most commonly used in commercial applications. The HF (high frequency) Contact plasma cutter initiates an arc by using a high frequency, high-voltage spark to ionise the air through the torch head. While the use of this method is quite common, it is not suitable for CNC cutting applications because it requires the torch to be in contact with the material that is being cut. The other method commonly used in commerical applications is the Pilot Arc method. This method uses a high-voltage, low current circuit to create a spark within the torch body. The creation of this spark generates a pocket of plasma gas, or a pilot arc. The pilot arc is able to maintain itself because there is a return electrical path in the torch head. The pilot arc is maintained until the torch comes into contact with the material being cut, at which time the main plasma cutting arc is ignited. Because this method does not require the torch to be in contact with the material it is cutting in order to ignite, this type of plasma cutter is used across all plasma cutter applications. Over the last decade, manufacturers of plasma cutters have continued to roll out new models that feature smaller nozzles and thinner plasma arcs. As these components have become smaller, plasma cutters have been reduced in size to the point where there are now hand-held plasma cutters. This development has made plasma cutters not only easier to handle, but also much more precise. Another benefit of the increasing miniaturization of plasma cutters has been a reduction in their cost. This reduction in cost has now made the purchase of a plasma cutter within the reach of most hobbyists.
What is the Difference between plasma welding and gas welding?
The difference between a gas and a plasma is the chemical properties. Plasmas collect electric currents and electric and magnetic fields affect plasmas
What is a plasma arc?
A very high temperature form of welding and cutting metals, using a jet of plasma.Arc plasma is the temporary state of a gas. The gas gets ionized after passage of electric current through it and it becomes a conductor of electricity. In ionized state atoms break into electrons (−) and cations (+) and the system contains a mixture of ions, electrons and highly excited atoms.A typical value of temperature obtained in a plasma jet torch may be of the order of 28000 °C(50000 °F ) against about 5500 °C (10000 °F) in ordinary electric welding arc.
How does a Carbon Arc Torch work?
A Carbon Arc Torch works by creating an electrical arc between two carbon electrodes. When current flows between the two electrodes, it ionizes the surrounding air, creating a high-temperature arc of light and heat. This intense heat can be used for welding, cutting, or melting metals.
Is there a difference between the arc of a chord and the arc of an angle?
the world may never know :D
