Both hybrid integrated circuits and monolithic integrated circuits were used in third generation computers. These integrated circuits contained from 4 to 100 transistors per integrated circuit. The image above shows hybrid integrated circuits of the type used in the IBM System 360 line of computers.
Integrated circuits (in many microprocessor integrated circuits) containing many billions of transistors each.
how many people live in one household in zimbawe
Not possible to say without knowing much more. In analog circuits every signal has an infinite continuum of states. In digital circuits every signal usually has two states (some digital circuits have been built with three states), but there may be many many billions of these signals (e.g. 21,000,000,000 is an awful lot of states).
A household slave was a slave trained and employed in the house of his/her owner. And no it was not better for the slave
-- Older/cheap Christmas lights.-- Switches for lights and other household appliances, but not the household outlets.
household circuit comprises of main swith,circuit breakers,wires and control switches.
All household, commercial, and industrial lighting and outlet wiring is parallel.
If they were in series you would have no power every time a tool or light bulb broke down
If electricity stops flowing to one part of the house, it continues to flow to the other parts.AnswerAll household circuits are connected in parallel with their supply voltage. This ensures that (a) all loads are subject to the same voltage, and (b) if one load fails the others continue to work.
Household electric wires are covered with plastic or other materials as insulation to prevent short circuits and fires, and to prevent electric shocks.
Fuses and circuit breakers are used to protect the wiring and devices from overload and heating caused by short circuits, short circuits that, if unprotected, could cause major damage and/or fire due to excessive current.
Typically anything that can turn on/off with ambient light detection (night lights, solar landscaping lights, laptops with lighting sensor to adjust the brightness and keyboard backlights, mobile phones, etc..)
Circuit breakers. Some older homes still have fuse boxes.
In Australia, the standard household electrical power supply is typically 230 volts with a frequency of 50 Hz. The current limit for residential circuits is generally 10 to 20 amps for lighting and general-purpose outlets, while dedicated circuits for appliances may have higher limits. Overall, the total load for a standard household is usually capped at around 100 amps for the main supply. Always consult local regulations and a qualified electrician for specific requirements.
Appliances typically use alternating current (AC) circuits, which are designed to handle the voltage and power requirements of household devices. These circuits operate at standard voltages, such as 120V or 240V, depending on the region and the appliance's power needs. Some appliances, especially smaller ones or those requiring direct current (DC), may use low-voltage circuits. Overall, the type of circuit used depends on the appliance's design and function.
For a house, it is recommended to use 12-gauge wiring for general electrical circuits. This gauge is suitable for most household appliances and lighting fixtures.