answersLogoWhite

0

The cradle separates dirt, clay and gravel from gold. As the miner rocks the cradle, water washers threw the dirt, separating out the gold. Cradling required at least two men to work. The cradle had a grate and a sieve. The dirt and sediment to be sifted through was emptied onto the grate in the cradle. The cradle was rocked quickly back and forth (in the action of a cradle) while water was poured over the sediment to help work it through. The grate stopped coarser stones from going through, while the fine material was sifted out the other end. The gold would be left behind for easy collection.

User Avatar

Wiki User

15y ago

What else can I help you with?

Continue Learning about General History

What American gold rush was before the Victorian gold rush?

The Californian gold rush!


What was the Term used to describe the hysteria that ensued after gold was discovered in California?

Gold Rush


What was the most popular method that prospectors used to mine for gold?

Diggers in the gold rush used the following equipment and methods to find gold:Panning involved the use of a solid pan. An amount of potentially gold-bearing dirt was placed in the pan with some water, and gently swished and shaken around, a process which would bring the smaller particles of gold to the surface.Cradling involved a wooden box loosely resembling a cradle. The cradle was used for sifting through larger amounts of sediment to find gold, and was popular from the early times of the goldrushes. It required at least two men to work. The cradle had a grate and a sieve. The dirt and sediment to be sifted through was emptied onto the grate in the cradle. The cradle was rocked quickly back and forth (in the action of a cradle) while water was poured over the sediment to help work it through. The grate stopped coarser stones from going through, while the fine material was sifted out the other end. The gold would be left behind for easy collection.Fossicking was another method which involved picking at rock and stone with sharp tools until gold was located inside, or to pick through mullock heaps left behind by other miners.Sieves were also popular. They were like a pan but with a mesh base through which the water would drain, to help separate gold from similar sized particles.Windlass was one of the slower methods of mining for gold. Two people were required to operate it, one at the surface and one in the mine shaft. The person in the shaft filled a bucket with potential gold-bearing soil and rocks, and the person on the surface operated the windlass to wind up the bucket. The contents of the bucket were then sorted through, perhaps in a cradle or a pan.


How do you cradle for gold?

Rocker contains a carpet to catch light sediment. You rock the cradle and then take the rug out and there's gold underneath, if your lucky.


What was a knife used for during the gold rush?

For thousands of years the knife has been used the same way it is used today. Only the metals used are different and the ways it is made are different. This was also true in the gold rush.

Related Questions

What was the wheelbarrow used for in the gold rush?

To carry the dirt from one place to another to be washed in a cradle


How much did a California gold rush mining cradle weigh?

A California gold rush mining cradle, also known as a rocker box, typically weighed between 50 to 100 pounds (23 to 45 kg). This weight varied depending on the materials used in its construction and the design. The cradle was designed to be portable, allowing miners to easily transport it to different sites in search of gold.


What is cradle?

a cradle is a mining machine that was used to mine gold in the goldfield in 20th centry


What was gold used for during the gold rush?

Yes the shovel was used during the Gold Rush.


What did the gold rush use to get to the gold?

The California Gold Rush used...PansLong TomsCradlesshovels


What was the shovel used for during the gold rush?

Yes the shovel was used during the Gold Rush.


What was the equipment used to find gold?

Shovel, Pick, Pan, Cradle


What was the shovel used in the gold rush?

Digging up the gold


What does gold cradling mean?

A gold cradle was used to help separate gold from gold-bearing dirt.Cradling involved a wooden box loosely resembling a cradle. The cradle was used for sifting through larger amounts of sediment to find gold, and was popular from the early times of the goldrushes. It required at least two men to work. The cradle had a grate and a sieve. The dirt and sediment to be sifted through was emptied onto the grate in the cradle. The cradle was rocked quickly back and forth (in the action of a cradle) while water was poured over the sediment to help work it through. The grate stopped coarser stones from going through, while the fine material was sifted out the other end. The gold would be left behind for easy collection.


What tools were used in the gold fields?

the tools used in the goldfields were mainly a shovel, pick, pan and cradle.


What shelter was used in the gold rush?

tents


How were gold mining shovels used?

is needed to to load rocks and dirt into the pan and cradle