0
It is possible to put a 6 speed back wheel on a 21 gear bicycle but you will never be able to use more than the 6 gear allowed by that cassette sprocket.
The best way to take advantage of the 21 gear bicycle is to change that 6 speed cassette sprocket and replace it by a 7 speed cassette sprocket. This way you will keep that back wheel and also be able to use all 21 gears of your bike.
What else can I help you with?
How do you put the back tire back on a bike?
To put the back tire back on a bike, first, place the chain on the smallest gear. Then, slide the wheel back into the frame, making sure the chain is on the gears. Tighten the axle nuts or quick-release skewer, and check that the wheel spins freely. Finally, reattach the brakes if necessary.
How do you put a back wheel on a bike with gears?
To put a back wheel on a bike with gears, first, place the wheel into the frame's dropouts. Then, reattach the chain onto the gears and secure the wheel in place using the quick release or axle nuts. Finally, adjust the gears and test the bike to ensure proper functioning.
How do you properly put the back wheel back on a bike?
To properly put the back wheel back on a bike, follow these steps: Place the wheel into the frame dropouts, ensuring the chain is on the smallest rear cog. Tighten the quick-release skewer or axle nuts, making sure the wheel is centered. Reattach the brake if necessary and check that the wheel spins freely without rubbing. Test the bike to ensure the wheel is securely in place before riding.
How can I replace a road bike inner tube?
To replace a road bike inner tube, follow these steps: Remove the wheel from the bike. Use tire levers to remove the tire from the wheel. Take out the old inner tube. Insert the new inner tube into the tire. Put the tire back onto the wheel. Inflate the new inner tube to the recommended pressure. Put the wheel back on the bike.
How do you put the back wheel on a mountain bike?
To put the back wheel on a mountain bike, follow these steps: Place the wheel into the frame dropouts. Tighten the quick-release skewer or axle nuts. Ensure the wheel is centered and spins freely. Check the brakes for proper alignment. Test the wheel to ensure it is securely attached before riding.
How can I effectively put a bike in a car?
To effectively put a bike in a car, you can use a bike rack or remove the front wheel and place it in the trunk or back seat. Make sure the bike is secure and won't move during the drive.
How do you put a back tire on a bike?
To put a back tire on a bike, first, release the brakes and remove the wheel from the frame. Then, slide the new tire onto the wheel hub, making sure it is aligned properly. Next, reattach the wheel to the frame, ensuring it is securely in place. Finally, reattach the brakes and test the wheel to ensure it spins smoothly.
How do you change a tube on a bike?
To change a tube on a bike, first remove the wheel from the bike. Then, use tire levers to take off one side of the tire from the rim. Pull out the old tube and replace it with a new one. Put the tire back on the rim, making sure the tube is not pinched. Inflate the tube to the recommended pressure and put the wheel back on the bike.
What is 5 Speed Return Type Transmission?
it means...that all the gear of bike can put in clockwiswe direction...i.e back side
Bike runs good tell you put it in gear then it dies what is the problum?
check the side stand switch , this cuts out the engine if it (the side stand) is down when you put the bike in gear .
How can I put a bike in a car?
To put a bike in a car, you can remove the front wheel and fold down the back seats to create more space. Then, carefully place the bike in the car with the handlebars facing towards the back. Make sure to secure the bike with straps or bungee cords to prevent it from moving during transportation.
Were do you put gear oil on 125 pit bike?
in the engine
