Depends. If it's a so-called flip-flop hub it will, if it's a fixed-only it won't. Flip-flop hubs have regular freewheel threading on one side, and the special fixed threading the other. But the axle may be too short.
The best braking options for a fixed gear bike with fixed gear brakes are typically front and rear caliper brakes or dual pivot brakes. These types of brakes provide reliable stopping power and control for a fixed gear bike.
I'm assuming you're asking about how to remove the freewheel, as the Mongoose Rebel 20 is a single-gear BMX. In that case you need the correct freewheel puller to get the freewheel off. Check out www.parktools.com for more info.
A fixed gear bicycle, also known as a fixie, is a type of bike that has a single gear and no freewheel mechanism. This means that the pedals are always in motion when the bike is moving, and you cannot coast. In contrast, other types of bicycles have multiple gears and a freewheel mechanism, allowing the rider to coast without pedaling.
The original fixie bike design features a single-speed drivetrain, a fixed gear that is directly connected to the rear wheel, no freewheel mechanism, and a simple, minimalist frame with no gears or brakes.
To build a fixie for your bike, you will need to start with a single-speed bike frame. Remove the freewheel and install a fixed gear cog on the rear wheel. Make sure to properly tension the chain and adjust the brakes. Consider adding a front brake for safety. Customize your fixie with handlebars, saddle, and other components to suit your preferences.
Fixed gear bikes typically do not come with brakes, as the pedals are directly connected to the wheel. Riders can slow down or stop by using their leg muscles to resist the motion of the pedals. However, some fixed gear bikes may be equipped with a front brake for added safety.
There are three main types of chainset bikes available in the market: single-speed, geared, and fixed-gear. Single-speed bikes have one gear ratio, geared bikes have multiple gears for different terrains, and fixed-gear bikes have a single gear with no freewheel mechanism.
The different types of brakes that can be used on a fixed gear bike are caliper brakes, cantilever brakes, and disc brakes. Caliper brakes are the most common type and are mounted on the frame or fork of the bike. Cantilever brakes are mounted on the frame or fork as well, but have a different design that allows for more clearance. Disc brakes are mounted on the wheel hub and provide strong stopping power.
Fixed gear bicycles equipped with disc brakes offer several advantages. Firstly, disc brakes provide better stopping power and control, especially in wet or muddy conditions. Secondly, they require less maintenance compared to traditional rim brakes. Additionally, disc brakes are less affected by rim wear and can provide consistent braking performance over time. Overall, the combination of fixed gear design and disc brakes can enhance the overall riding experience in terms of safety and performance.
Depends on if it's a freewheel or a freehub design. For a freewheel you need the appropriate freewheel puller. For a freehub you need a splined lockring tool.
In the context of bicycles, the term "fixie" refers to a fixed-gear bicycle, which has a single gear and no freewheel mechanism. This means that the pedals are always in motion when the bike is moving, and the rider cannot coast.
Fixed gear bikes can be more challenging to ride compared to bikes with multiple gears because they do not have a freewheel mechanism, meaning the pedals move with the wheels at all times. This can require more skill and control, especially when braking and navigating different terrains.