0
What else can I help you with?
What is the chain and sprocket sizes for a Suzuki GSXR1000 06?
17 tooth front, 42 tooth rear, 110 link chain, size 530
What is the chain and sprocket sizes for a Yamaha RXZ?
Sprocket size will b 16T & 39
What is the chain and sprocket sizes for a suzuki gs750?
630 pitch, 96 links
What is the difference between sprocket and chain wheel?
Sprocket and chain and what?
What is the stock chain Size and Sprocket Size for a 2007 Suzuki GSXR-750?
The stock chain size for a 2007 Suzuki GSXR-750 is typically a 525 chain. The standard sprocket sizes are a 16-tooth front sprocket and a 43-tooth rear sprocket. This setup provides a good balance of acceleration and top speed for the motorcycle. Always consult the owner's manual or a professional for specific recommendations or modifications.
What is the best drive sprocket removal tool to use for removing a stubborn sprocket from a motorcycle chain?
A chain breaker tool is the best tool to use for removing a stubborn drive sprocket from a motorcycle chain. It is specifically designed to break and remove chain links, making it easier to take off the sprocket.
How does a bike chain stay on the sprocket?
The chainring by the pedals and the sprocket(s) by the rear wheel.
What is a minimum plain bore sprocket?
A minimum plain bore sprocket is a roller chain sprocket with a hole drilled through the center. A finished bore sprocket is a roller chain sprocket with a hole drilled through the center augmented by either a keyway or set screws.
How do you keep a chain from jamming in the sprocket on a small McCulloch chain saw?
Normally that indicates a worn out sprocket. Replace and you should be OK.
Does the Peugeot 407 have a timing belt or timing chain?
Both, cranshaft to camshaft sprocket, belt, camshaft sprocket to cams, chain.
What is the meaning of sprocket?
A sprocket is a toothed wheel whose teeth engage the links of a chain.
What is the process for bike sprocket replacement?
To replace a bike sprocket, you will need to first remove the chain from the sprocket. Then, use a wrench to loosen the bolts holding the sprocket in place. Once the bolts are removed, take off the old sprocket and replace it with the new one. Secure the new sprocket in place by tightening the bolts. Finally, reattach the chain to the new sprocket.
