Never heard of a 32" diameter bicycle wheel, and none is listed on my favourite reference site - so I'd say no.
On the other hand, 32 mm wide would be a quite common size. You'd need to check all the numbers.
It could be something like 700C x 32, or 622 x 32, which both would be for 32 mm wide tires of the same diameter. 700C would be for approximate outside diameter and 622 for bead seat diameter.
I guess it'd be possible to have a tire that's 3.2" widethough, although I haven't seen one.
The Genesis Onyx cruiser referred to in the answer below is listed as having 29" wheels, which is the rather silly name for road-sized 28"/700C/ETRTO 622 mm rims that can take wider tires and be ridden off-road.
Yes - I was in WalMart today (6/4/12) and they had Genesis cruiser bikes with 32" tires! I don't know how good the quality is but they looked awesome and were $199.99. Colors were black with white fenders, green, and orange.
Only place I've seen a 32" tire are on the Genesis 32" Bicycles at Wal-Mart. Maybe in 2013 they'll eventually carry the tires once they sell enough of the bikes first.
I checked the Genesis website, but they haven't updated any info on their 32" bikes, and since Wal-Mart carries the Genesis bikes, my guess is that Bell might be the company that will make 32" tires in the mere future. 32" is still a fairly new size.
Depends on make and model of bicycle
wheel+wheel=bicycle
My bicycle is rubbish because it has borken one wheel.
To accurately measure the size of a bicycle wheel, use a tape measure to determine the diameter of the wheel from one edge of the tire to the other. Make sure to measure from the center of the wheel for accuracy. The size of a bicycle wheel is typically expressed in inches or millimeters.
The circumference of the wheel is Pi multiplied by the diameter (0.705). Divide 1000 meters (1km) by that answer - and you'll have your solution !
u take a bicycle wheel
To measure a bicycle wheel accurately, use a tape measure to find the diameter of the wheel from one edge of the tire to the other. Make sure to measure from the center of the wheel for accuracy. This measurement will give you the size of the wheel, typically in inches or millimeters.
To align bicycle handlebars with the front wheel, first make sure the wheel is straight. Loosen the stem bolts, adjust the handlebars so they are centered with the wheel, and then tighten the bolts evenly. Double-check the alignment and make any necessary adjustments before riding.
To measure bicycle wheel size accurately, use a tape measure to determine the diameter of the wheel from one edge of the tire to the other edge, passing through the center of the wheel. Make sure to measure in millimeters for precision.
A bicycle should not make any rotations! The number of rotations made by the wheels of a bicycle will depend on the wheel size.
To turn the dynamo in order to make electricity.
To convert a regular bicycle into a 3-wheel bicycle, you will need to purchase a conversion kit that includes a new rear axle with two wheels attached. You will need to remove the existing rear wheel and replace it with the new axle and wheels. Additionally, you may need to make adjustments to the frame and handlebars to accommodate the new configuration.