answersLogoWhite

0

That depends upon what sort of crank set you have.

cottered crank (older bicycle)

press fit - newer / current bicycles

out board bearing (newer current bikes - expensive bicycles generally

one piece crank sets - cheapo bicycles mostly

You need different tools for each of these types

The best way to figure it out would be to go to the Park tool web site,

then find out first what kind of crank it is, what tool(s) you need, then how to use the tool(s)

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How to remove the pedal crank from a mountain bike?

To remove the pedal crank from a mountain bike, you will need a pedal wrench or hex key. First, loosen the pedal by turning it counterclockwise. Then, use the wrench to remove the bolt holding the crank arm in place. Once the bolt is removed, gently tap the crank arm with a rubber mallet to release it from the bike frame. Repeat the process for the other side of the bike.


How to remove the pedal arm from a bike?

To remove the pedal arm from a bike, first, use a pedal wrench to loosen the pedal from the crank arm by turning it counterclockwise. Once the pedal is removed, locate the bolt that attaches the pedal arm to the crank arm and use the appropriate tool to loosen and remove it. Gently tap the pedal arm with a rubber mallet if needed to loosen it from the crank arm. Finally, carefully pull the pedal arm away from the bike frame to completely remove it.


How do I go about replacing a bike pedal arm?

To replace a bike pedal arm, you will need to first remove the old pedal arm using a pedal wrench. Then, you can install the new pedal arm by screwing it onto the crank arm of the bike. Make sure to tighten it securely and test the pedal before riding.


How can I remove a bike pedal crank?

To remove a bike pedal crank, you will need a crank puller tool. First, remove the pedal from the crank arm. Then, use the crank puller tool to unscrew the crank arm from the bike's bottom bracket. Turn the tool clockwise to loosen and remove the crank arm.


How can I properly perform bike pedal arm removal?

To properly remove a bike pedal arm, first, use a pedal wrench to loosen the pedal from the crank arm by turning it counterclockwise. Once the pedal is removed, use a crank puller tool to remove the crank arm from the bike's bottom bracket by turning it clockwise. Be sure to follow the manufacturer's instructions and use the appropriate tools to avoid damaging the bike.


How can I remove a bike pedal arm?

To remove a bike pedal arm, you will need a pedal wrench or a hex key. First, loosen the pedal by turning it counterclockwise. Then, use the pedal wrench or hex key to unscrew the pedal arm from the crank. Make sure to hold the crank arm steady while you do this. Once the pedal arm is removed, you can clean and inspect the threads before reattaching or replacing it.


How can I remove the bike pedals crank?

To remove the bike pedal crank, you will need a crank puller tool. First, unscrew the pedal from the crank arm. Then, attach the crank puller tool to the crank arm and turn it clockwise to remove the crank from the bike.


How do I remove the pedal arm from a bike?

To remove the pedal arm from a bike, you will need a pedal wrench or an Allen key. First, locate the pedal on the side you want to remove. Use the wrench or Allen key to turn the pedal in a counterclockwise direction to loosen it. Once it is loose, continue turning until the pedal comes off completely. Repeat the same steps for the other pedal if needed.


How can I use a tool to remove bike pedals efficiently?

To efficiently remove bike pedals, use a pedal wrench or a pedal removal tool. Place the tool on the pedal axle and turn it counterclockwise to loosen and remove the pedal from the crank arm. Repeat the process for the other pedal.


How can I remove the right bike pedal?

To remove the right bike pedal, turn the pedal spindle counterclockwise using a pedal wrench or a 15mm wrench. Make sure to hold the opposite crank arm to prevent it from turning while you unscrew the pedal.


How can I remove a bike pedal?

To remove a bike pedal, you will need a pedal wrench or a hex key that fits the pedal spindle. Turn the wrench counterclockwise to loosen and remove the pedal from the crank arm. Make sure to turn the wrench in the direction that matches the pedal's threading, which is typically opposite on the left side pedal.


How can I remove the bike pedal arms efficiently?

To efficiently remove bike pedal arms, you will need a pedal wrench or a hex key that fits the pedal spindle. First, loosen the pedal by turning it counterclockwise. Once loose, continue turning until the pedal arm is completely removed from the crank. Repeat the process for the other pedal arm. Be sure to apply lubricant if the pedals are difficult to remove.