Lift the empty bottle out of the water cooler and move out of the way. Open the seal of the full bottle, while it is sitting on something. Lift the full bottle and flip over quickly, so that the narrow end (where you took off the sealed cap) fits in the opening of the cooler. Adjust to make sure it is centered and balanced on the cooler. Enjoy
You can purchase a water cooler for your home from Home Depot. When the large water bottle runs out, you can take your empty bottle back to Home Depot and they will exchange it with a new, full bottle. They recycle the bottles which is good for the environment.
A full bottle of water
It is easier to squeeze an empty bottle because there is less resistance from the air inside the bottle compared to the water. The water in a full bottle creates more pressure and resistance when you try to squeeze it.
The water level in the bottle should be about halfway full for a successful bottle flip.
A full liter bottle of water weighs approximately 1,000 grams, as the density of water is about 1 gram per milliliter. Since there are 1,000 milliliters in a liter, this means a full liter of water is equivalent to 1,000 grams.
full or empty?
The bottle will expand and overflow.
The compressibility of water is very low.
The temperature will be the same.
They have 10/4 bottles of water, so 10 - 4 = 6 6-4 = 2 Leaving us with 2/4 bottles of water. Two full bottles of water, and one half-full bottle.
WIell...... ITS ALREADY FULL SO THERE IS NO MORE ROOM FOR ANY MORE WATER
The water in the bottle has room to move when it is half full; it ends up sloshing around trying to remain at its initial position, and much of the energy goes into moving the water instead of the water+bottle.