Depends on what's wrong with them. Go visit www.sheldonbrown.com, www.parktool.com or www. bicycletutor.com to find out more.
For a well-used bike it's quite common that the chain has worn too long to engage properly with the sprockets any more. If caught in time a new chain can fix it. If it's been going on longer you need new sprockets(a cassette) too. If it's been going on for ages you might also need new chainring(s).
Your new bike chain may be slipping when you pedal hard due to issues such as improper installation, a worn chain, or misalignment of the gears. It is recommended to have a professional inspect and adjust your bike chain to resolve the issue.
Your bike chain may be slipping when you pedal hard due to a few reasons. It could be because the chain is worn out and needs to be replaced, the chain may be too loose, the gears could be worn out, or the chain and gears may need to be cleaned and lubricated. It's important to regularly maintain your bike to prevent these issues.
Chain skips can occur when pedaling hard due to the chain slipping off the teeth of the gears, usually caused by a misalignment of the chain or worn-out components.
Yes, there are any number of aftermarket parts available for your Harley. If you need help finding a suitable rear brake pedal, try asking at the local dealer for some help.
Your bike chain may slip when you pedal hard due to a few reasons, such as a worn-out chain, misaligned gears, or a dirty chain. These issues can cause the chain to not grip the gears properly, leading to slipping. Regular maintenance and proper adjustments can help prevent this issue.
The solenoid is an internal transmission problem. It causes slipping, non-shifting, hard or erratic shifts, overheating,?æas well as loss of one or more gears.?æ
you are stepping on the gas peddle too hard
== ==
hard core movement
play COD
When you pedal hard, the chain on your bike may skip gears due to a misalignment of the chain and the gears. This can happen if the chain is worn out, the gears are dirty or damaged, or if the derailleur is not properly adjusted. It is important to maintain and tune your bike regularly to prevent this issue.
get to 3000 RPMs in 2nd or 3rd gear and then step on the gas hard(safely!) , If the revs go up quickly and yet he car doesn't pull hard , the clutch is slipping.