0
Yes. There is a device called a chain tool that drives the rivets out of a bicycle chain in such a way as to let them be driven back in later. You would add a link after first buying one (chain tool $8-$15, and an extra link) from the bicycle shop. If you wanted to lengthen the chain by quite a bit, you would break an existing chain into two pieces, one of which was the length you desired to add. The chain tool would then drive the rivets back in on the two links you popped out, and your chain would then be longer. There is no reason to lengthen a chain unless you've put on a huge back gear, and your current derailleur is incapable of switching the chain over to it. Even so, you'd probably be better off changing your derailleur instead. A chain that is too long for your derailleur to handle will fall off due to the slack in the chain wobbling from side to side. Thank you for asking a question in bicycles that doesn't have ANYTHING to do with the Tour de France!
What else can I help you with?
What is the correct direction for installing a Shimano chain on a bicycle?
When installing a Shimano chain on a bicycle, make sure the chain is facing the correct way with the Shimano logo visible on the outside of the chain.
How many bicycle chain links are typically found in a standard bicycle chain?
A standard bicycle chain typically has around 116 links.
What is the best way to remove a stubborn bicycle chain using a bicycle chain tool?
To remove a stubborn bicycle chain using a bicycle chain tool, first, position the tool on one of the chain links. Then, turn the handle of the tool to push the pin out of the link. Repeat this process for each link until the chain is fully removed. Make sure to apply steady pressure and use the tool correctly to avoid damaging the chain or the tool.
What is the best way to repair a broken bicycle chain link using a bicycle chain link tool?
To repair a broken bicycle chain link using a bicycle chain tool, first, remove the broken link by aligning it with the tool's pin and pushing it out. Then, connect the chain ends by inserting the pin into the outer link and using the tool to push it back in. Ensure the pin is secure and the chain moves smoothly before riding.
How can I determine the condition of my bicycle chain using a bicycle chain checker?
To determine the condition of your bicycle chain using a bicycle chain checker, simply place the tool on the chain and follow the instructions provided. The tool will measure the wear of the chain, indicating whether it needs to be replaced.
What is the standard chain width for a 9-speed bicycle chain?
The standard chain width for a 9-speed bicycle chain is 6.6mm.
What is the standard chain width for an 8-speed bicycle chain?
The standard chain width for an 8-speed bicycle chain is 7.1 mm.
What is the purpose of a bicycle chain splitter and how is it used to maintain and repair a bicycle chain?
A bicycle chain splitter is a tool used to remove and replace links in a bicycle chain. It is used to maintain and repair a bicycle chain by allowing the user to adjust the length of the chain or replace damaged links. The tool works by pushing out the pin that holds the chain links together, making it easier to separate or connect the chain as needed.
What are the best practices for maintaining a bicycle chain with the use of bicycle chain oil?
To maintain a bicycle chain, apply bicycle chain oil regularly to lubricate and protect it from wear. Wipe off excess oil and dirt before applying new oil. Clean the chain periodically with a chain cleaner tool. Check the chain for wear and replace it if necessary.
What type of lubricant should I use for my bicycle chain to ensure smooth and efficient performance?
For your bicycle chain, use a bicycle-specific chain lubricant to ensure smooth and efficient performance.
What is the best method for removing a bicycle chain using a bicycle chain removal tool?
To remove a bicycle chain using a bicycle chain removal tool, first, position the tool over one of the chain links. Then, turn the handle of the tool to push the pin out of the link. Repeat this process on another link to completely remove the chain.
What is the purpose of a bicycle chain wrench and how does it differ from a regular wrench?
A bicycle chain wrench is a specialized tool used to remove or install the chain on a bicycle. It differs from a regular wrench in that it is designed specifically for working with bicycle chains, with a shape and size that allows for easier manipulation of the chain.
