Orientation of an open-ended toilet tissue holder: The open end of a toilet tissue paper holder should always face you (from a sitting position). You can turn it faceing away from you, but you'll quickly discover it looks uncomfortably wrong to the eye.
To properly put toilet paper on a holder, follow these steps: 1. Insert the cardboard tube of the toilet paper roll onto the holder. 2. Pull the end of the toilet paper through the opening in the holder. 3. Ensure the toilet paper hangs down in front of the holder for easy access.
Either on the left or right, 26 inches off the floor and 8 to 12 inches forward from the front of the toilet bowl. Reference: http://www.ehow.com/info_8027723_proper-placement-toilet-paper-holder.html
Toilet Paper Holder
toilet paper holder
To install a toilet paper holder, first locate a suitable spot near the toilet. Use a level to ensure it is straight, then mark the placement of the holder. Drill holes into the wall at the marked spots, insert wall anchors if needed, then screw the holder into place. Finally, attach the toilet paper holder to the screws and secure it in place.
The standard placement is 20 - 24 inches from the floor up to the center of the TP holder. New toilet configuration these days my be several inches higher than the old standard toilet. If you have a newer toilet, adjust accordingly.
Joseph Gayetty invented toilet paper in 1857
Toilet paper holders don't have to be boring. With some careful shopping and planning, you can find a unique toilet paper holder that adds personality to your bathroom. To find a one-of-a-kind toilet paper holder, try shopping at stores that specialize in hardware or bathroom remodeling because they will have the largest selection. You can also look to purchase a toilet paper holder at an estate sale or auction to find antique hardware that is unique.
From the front of your vagina to the back.
To properly install a toilet paper holder, first locate a suitable spot near the toilet. Use a level to ensure it is straight, then mark the placement of the screws. Drill pilot holes, insert wall anchors if needed, then screw in the holder. Finally, attach the toilet paper holder to the screws and secure it in place.
To install a toilet paper holder, first locate a suitable spot on the wall near the toilet. Use a level to ensure it is straight. Mark the positions for the screws, then drill holes and insert wall anchors if needed. Attach the holder to the wall using screws or mounting hardware. Finally, place the toilet paper roll on the holder.
It would probably be best if you had the toilet paper holder was within arm's reach. Actually it should be within reach of your arm furthest from the tissue holder so you can pull with your closest arm and tear with the other.