If your bike lock's combination is jammed and you can't unlock it, try gently tapping the lock to dislodge any stuck parts. If that doesn't work, contact the manufacturer for assistance or consider seeking help from a professional locksmith. Avoid using excessive force as it may damage the lock further.
I think combination locks are safer since key locks are easy to break into with a knife or a ice prick to unlock the key lock.
To unlock a combination lock, you need the number combination. To use those, you go left, right, left to get the right numbers.
I think you have to push the 'unlock' button twice in order to unlock the doors.
The driver door does not unlock the power locks for a few reasons. This motor could be burned out or the wires could not be attached correctly.
You have a few options. One, you can change out all of the locks with the same type of lock of which a master key can be made for all of them. The other is to change them out with the exact same lock which the same key will unlock each one. If these are padlocks, you can go with a combination lock which you can get changed to the same combination for all of the locks.
It doesnt have a switch. You just open it with your hand. It does have a lock which locks it with the central locking so it should unlock when you unlock the car.
It should lock and unlock with the power door locks. If it is stuck in the locked position, there is a lever in the trunk on the driver's side behind the carpet that will unlock it.
Yes, combination locks are cheaper than your standard key lock. However, the key locks are generally more secure than the combination locks so depending on what your needs are, you should balance cost against security.
Then you have to lock and unlock the doors by hand.
Umm, there are still manual locks. Take your finger and push the lock over and unlock the door. Good Luck!!!!
Buy some, I think it's Graphite Powder and poor it in the lock, and over time it should mend.
All Locks Have A Different Combination So There Inst One