A humidistat is a device used to control the operation of space conditioning systems such as air conditioners, dehumidifiers and humidifiers. When used with an air conditioner, for example, the humidistat cycles the unit on and off based on humidity rather than temperature as provided with a regular thermostat. A humidistat set at 70 percent relative humidity, for instance, will cycle the air conditioner on when relative humidity reaches 70 percent or above, even if the thermostat setting does not call for cooling.
No you don't need the humidstat on as this defeats the purpose of the AC doing its work.
A thermostat is a device that regulates temperature by turning heating or cooling systems on and off. A humidistat, on the other hand, measures and controls humidity levels in the air. While a thermostat focuses on temperature control, a humidistat focuses on humidity control.
The difference is the relay operation.Normally opened or normally closed.If you add an external spdt relay,you could have a humidistat/dehumidistat.
With a temp/rh probe barring that take a humidistat and turn dial when it clicks from closing circuit note the setting and that is humidity surrounding humidistat
A humidistat fan is designed to automatically adjust its speed based on the humidity level in a room. It helps regulate humidity by increasing or decreasing airflow to maintain a desired level of moisture in the air. This can prevent issues like mold growth, condensation, and discomfort caused by high or low humidity levels.
Not sure how it works, but it seems that you need to raise the humidistat to make the heat go on. Just raising the thermostat doesn't turn on the heater. Type your answer here...
A humidistat is a device that measures the humidity levels in the air. It is used in a humidifier to control the amount of moisture released into the air. When the humidity levels reach a certain point set by the user, the humidistat signals the humidifier to either turn on or off to maintain the desired humidity level.
I bought mine from a shop reptile shop but you can get them off of the internet
My dehumidistat says to set the temperature to 70 degrees.
My dehumidistat says to set the temperature to 70 degrees.
An electronic humidistat works by measuring capacitance of an air gap capacitor. In this type of sensor, as air flows in between two electrodes, the capacitance between two plates will change according to the RH contained in air.
System could have a humidistat installed...