It doesn't appear regular epoxy paint will work for inhibiting mold growth, but there are epoxy wall coatings that have a mold inhibitor in them. One of them is called The Basement Doctor Epoxy.
Electrically non conducting paint does not conduct electricity in any way. This type of paint is an insulator. Standard water-based paints or acrylic paints are normally non conducting paint.
RAL
The difference between the conventional coating and film coating depends with the material used. The film coating uses a film to coat while the conventional coating does not use any type of material to coat.
There are several different industrial paint systems on the market. The cost of such system is quite variable and largely depends on the type of system you hope to purchase. There are several types of industrial painting systems available a\for each type of application. Depending on your applicationI am sure you can find a good system.
Illinois probably manufactures cars more than any other item. Although, Michigan does more.
Yes, but it may not stay on very well. Besides, epoxy paints are very hard and wear resistant, while latex paints aren't. If the epoxy paint was needed the first time, repainting with something much less durable might not be such a wise move.
Epoxy primer has to go over a bare surface otherwise it can act as a stripper, causing the base coat, along with the newly applied epoxy to delaminate or lift from the surface.
I wouldn't. I would try to get the first one to cure somehow, possibly by warming that area.
When you say rubber base paint I assume you mean latex paint. Yes, latex paint will adhere to an existing epoxy finish. However, the epoxy must already have cured. Meaning, it was already applied sometime in the past. A pretty good rule of thumb to go by when you're unsure if two finishes are compatible is to apply a coat of primer. Also, when latex paint is applied to a primed surface it will last that much longer, appear more uniform and will usually require only one coat of paint for proper coverage.
Yes, you can.
You can definitely use latex paint over epoxy. In fact, it is recommended to use latex over epoxy by the paint manufacturers, rather than using epoxy over epoxy. The latex adheres better and if you then want to use epoxy next time you paint, you have a nice coat of latex between the layers. If you use epoxy over epoxy, often the paint will just peel off in layers once some time passes (and sometimes right away).
ratio of catalyst to paint
Yes you can.
You paint it with epoxy primer.
No, Seal-Krete Epoxy-Seal is an acrylic-epoxy blend. By mixing 2 unlike resins (patio paint and Epoxy-Seal) the hard Epoxy-Seal acrylic-epoxy resins would become weak resulting in a coating failure. No, Seal-Krete Epoxy-Seal is an acrylic-epoxy blend. By mixing 2 unlike resins (patio paint and Epoxy-Seal) the hard Epoxy-Seal acrylic-epoxy resins would become weak resulting in a coating failure.
I
Epoxy glues would be best.