answersLogoWhite

0

What else can I help you with?

Continue Learning about Industrial Engineering

What welder can weld five sixteenth steel?

To weld five-sixteenth inch (5/16") steel, a MIG (Metal Inert Gas) welder or a TIG (Tungsten Inert Gas) welder can be effective, provided they are appropriately rated for the material thickness. A MIG welder with a minimum output of around 140-180 amps will typically handle this thickness well, especially with the right wire size and shielding gas. For TIG welding, a machine with at least 200 amps is advisable for good penetration and control. Always ensure proper technique and settings for a strong, clean weld.


How does a welder utilize technical drawings?

A welder utilizes technical drawings to determine what type of joint he must weld , joint preparation, where on the joint the weld must be placed, the size of the weld, and so on . Certain structures require this specific information , in order to be safe , sound , etc.


What is the welder performance qualification test is required to determine the weld ability?

operate welding machine


If a welder is qualified to multiple qualification on 12.750 250 pipe under api 1104 can he roll out weld a 20 500 weld?

No, a welder qualified under API 1104 for 12.750 250 pipe cannot automatically roll out weld a 20 500 weld. Each welding procedure qualification (WPQ) is specific to certain variables, including pipe diameter and wall thickness. The welder would need to demonstrate qualification for the new pipe specifications to ensure compliance with safety and quality standards.


Can you weld titanium and stainless steel?

Short answer: No. Long answer: Welding stainless directly to titanium results in an unusable weld. If you have access to an electron beam welder (they cost millions and they're the size of a house) you can design a joint with a piece of vanadium between the two other metals.

Related Questions

What it the welder called that can weld aluminum?

can weld aluminium with a mig or tig welder


What is the principle of electric welding?

the basic principle of welding is 1. first we have some broken material 2. a welder 3. welder should know how to weld


What is a sp weld?

SP welder means Structural purpose welder.


What is the optimal welder voltage setting for achieving a strong and consistent weld?

The optimal welder voltage setting for achieving a strong and consistent weld depends on factors such as the type of metal being welded and the thickness of the material. It is recommended to consult the welding machine's manual or a professional welder for specific guidance on voltage settings.


What does a welder do on a day to day basis?

Weld


What size welder do you need for 6mm steel?

In order to weld pieces of 6mm steel you can use any type of welder. Depending on how strong and how pretty the weld needs to be will determine the type of welder you choose.


How do you use your portable welder to weld aluminum?

the only way you can weld aluminum is with AC current and high freak setting on the welder , if your welder does not have theses setting then it will not weld aluminum. Good answer! AC is a must! The only other way is if you have an oxy/ace setup (very low psi) or alot of mapp gas, but you have to spread a flux paste on the material (looks like drywall mud) EXTREMELY MESSY!


How many weld in 2 inch can a welder do?

3 bead cap


What is a tack weld?

When a welder makes a small weld bead to "tack" a joint together so it will not move. This makes it easier to weld a joint without having to clamp it.Tack welding is when a welder makes a small bead to "tack" the metal into place for the final welding.


What welder can weld five sixteenth steel?

To weld five-sixteenth inch (5/16") steel, a MIG (Metal Inert Gas) welder or a TIG (Tungsten Inert Gas) welder can be effective, provided they are appropriately rated for the material thickness. A MIG welder with a minimum output of around 140-180 amps will typically handle this thickness well, especially with the right wire size and shielding gas. For TIG welding, a machine with at least 200 amps is advisable for good penetration and control. Always ensure proper technique and settings for a strong, clean weld.


Can you weld map welder id numbers?

probably a editing mistake; question should be: can you read map welder id numbers?


How does a welder utilize technical drawings?

A welder utilizes technical drawings to determine what type of joint he must weld , joint preparation, where on the joint the weld must be placed, the size of the weld, and so on . Certain structures require this specific information , in order to be safe , sound , etc.