answersLogoWhite

0

What else can I help you with?

Continue Learning about Industrial Engineering

What is the ANSI code for mild steel?

http://www.engineeringtoolbox.com/aisi-sae-steel-numbering-system-d_1449.html here are the ansi codes...you can figure it out


What is the tensile strength of aisi 1075 steel?

if its standard wrought carbon steel, the psi should be just about in the 100,000psi range. The last two digits of the designation, 75, are the carbon content. 0.75%. the higher the carbon content, the higher the tensile strength. The ultimate tensile strength of a steel such as AISI 1075 varies depending upon the heat treated condition and hardness. The tensile strength of a steel can be approximated from the hardness using hardness conversion tables found elsewhere on the web.


How can weld en42 steel?

Welding EN42 steel, a high-carbon steel known for its hardness and strength, requires specific techniques to ensure a strong joint. Preheating the steel to around 200-300°C (392-572°F) helps reduce the risk of cracking. Using suitable filler materials, such as low-alloy steel electrodes, and post-weld heat treatment can improve ductility and relieve residual stresses. Proper shielding gas and welding methods, like TIG or MIG, are also essential for achieving a quality weld.


What rays are used in examining the inside of a weld in a steel oil pipe?

X-rays are commonly used to examine the inside of a weld in a steel oil pipe through a process known as radiographic testing. This non-destructive testing method allows for the detection of internal flaws, such as cracks or voids, by capturing images of the weld structure. Additionally, gamma rays can also be used for similar purposes, particularly in industrial radiography, providing insight into the integrity of the weld without damaging the material.


Steel electrodes in arc welding are generally coated to?

Steel electrodes in arc welding are generally coated to provide several benefits, including improving arc stability, enhancing the weld's mechanical properties, and preventing oxidation during the welding process. The coating can also contribute to the formation of slag, which helps protect the molten weld pool from contamination and atmospheric elements. Additionally, the coating aids in the smooth transfer of molten metal, resulting in a better overall weld quality.

Related Questions

What type filler rod use 4145 steel?

When welding 4145 steel, a commonly used filler rod is ER80S-Ni2 for gas metal arc welding (GMAW) or E8018 for shielded metal arc welding (SMAW). These filler materials provide good strength and toughness, which complement the properties of 4145 steel. It's important to select a filler that matches the desired mechanical properties and intended service conditions of the finished weld. Always consult the specific welding procedure and material specifications for optimal results.


What does AISI stand for?

AISI stands for "American Iron and Steel Institute"


What is the Full form of aisi?

AISI stands for American Iron and Steel Institute.


What is the melting point for AISI 4130 Steel?

AISI 4130 steel, also known as B.S CDS 110 steel, melts at between 1370 and 1400oC.


Can you weld steel to steel?

Yes, you can weld steel to steel. You can use steel welding rod.


Can you weld steel to stainless steel?

Yep, you can weld steel to stainless and you can weld stainless to steel. You can use steel or stainless welding rod in either case but the steel or steel welding rod will of course rust.


What is AISI 1020 steel?

its having the magnetic property


WHAT IS COMPRESSION STRENGTH OF AISI 1045?

The AISI 1045 Medium Carbon Steel has a Shear Strength of 80 GPa.


What are some of the aims of the American Iron and Steel Institute also known as AISI?

Some of the aims of the American Iron and Steel Institute, also known as the AISI, are to promote steel production not only in America but globally, and to provide high-caliber talented people with jobs. The AISI also aims to be a growing company and provide to those who need steel.


Can you heat treat 5140 steel?

Yes,steel grade SAE5140 or AISI 5140 can be heat treated.


What is SS400B steel?

in JIS (Japanese) "SS" stands for structural steel, and 400 grade which is similar to AISI 1018.


What Welding electrode can be used to weld A 36steel to AISI 4140 steel?

I have experience when my team welded "JIG Ladle" A36 to AISI 4140, we used electrode E7018 with SMAW process. The important thing for this welding's prehating during welding min. 180 degree celcius and did peening the weld beads to minimize residual stresses. After welding covered by blanket for slow cooling. Regards, Asep S (asep93st@yahoo.com)