The serial Pulse Coder A is a rotary shaft encoder that uses Fanuc's
proprietary serial scheme for communication. The CNC control sends
a request pulse to the encoder, and the encoder responds with a
77-bit serial string of bits that contains shaft angle and rotation
count information, and optionally a coarse absolute position
that can be used for motor commutation. At the end of the
data is a cyclical redundancy check character.
The neck pulse is the corotid pulse; the wrist pulse is the radial pulse; the arm pulse is the brachial pulse. it seems that the pulses are named according to the artery palpated; therefore, your thumb pulse must be your princeps pollicis pulse. this is an educated guess.
A hamster pulse is the pulse of a hamster.
Pulse width mod, pulse amplitude mod, pulse position mod, pulse code mod.
apical pulse is actually the heartbeat
Status of "down" means no pc is connected where as "administratively down" depends upon the clock pulse of the interface.
it is called the femoral pulse.
Measure the pulse in the wrist area, radial pulse.
the following Pulse location are? 1. Apical pulse 2. Radial pulse 3. Brachial pulse 4. Apical-radial pulse
The pulse can be located in various places on the body, including the wrist (radial pulse), neck (carotid pulse), inner elbow (brachial pulse), groin (femoral pulse), behind the knee (popliteal pulse), on top of the foot (dorsalis pedis pulse), and behind the ear (posterior auricular pulse).
Status of "down" means no pc is connected where as "administratively down" depends upon the clock pulse of the interface.
38
It monitors pulse.