0
What else can I help you with?
What machines shape metals?
The ones that i use at college and work are a milling machine, a lathe, a drill, and a saw but i think the main ones (In mechanical engineering) are the Milling Machine and the Lathe.
What is a large cnc vtl operator?
VTL = Vertical Turret Lathe with computer numerical control (CNC)
Safety precaution while using binding machines?
precautions safety on a binging machines
Do fashion designers work with machines more than people?
do fashion designers work more with machines than people
What kinds of buildings housed industrial machines?
Factories
What are the short comings of lathe machines?
what is lathe machine in short answer
What is a three jaw chuck in lathe machines?
The package is part of the workpiece.
How a lathe machine is specified?
A lathe machine is specified by-1.The maximum diameter of the workpiece that can be operated on the machine.2.The distance between the headstock and the tail-stock of the machine.3.The length of bed of the machine.
What products does Harrison Lathe sell?
Harrison Lathe is a UK based company which manufactures comprehensive lathe machines. It sells Conventional (engine) Lathes. They also sell Manual or CNC Lathes.
What are the advantages and disadvantages of lathe machine?
One advantage of a lathe machine is that it can perform very detailed and intricate designs. One disadvantage of a lathe machine is that these machines are more expensive than other types of machines used to produce this type of work.
How do you specify lathe?
The lathe is Specified on the basis on the following factors: 1.Lathe swing or simply swing i.e maximum diameter of the workpiece that can be machined. 2.Maximum distance between the HEadstock and tailstock. 3.Length of the bed. then there are many kinds of lathe categorized by their specific functions or mechanisms but these are the general specifications for every lathe.
What is Half Nut Mechanism in Lathe Machines?
Oh, dude, the Half Nut Mechanism in lathe machines is like the key to threading. It's this cool little gadget that engages the lead screw to control the movement of the carriage during threading operations. So, basically, it's like the lathe machine's way of saying, "Hey, let's make some threads without going full nut."
What machines shape metals?
The ones that i use at college and work are a milling machine, a lathe, a drill, and a saw but i think the main ones (In mechanical engineering) are the Milling Machine and the Lathe.
State how the size of a center lathe is specified?
the size of a lathe can be described by either of the following ways. 1.DISTANCE BETWEEN THE TWO SPINDLES. 2.SWING DIAMETER.ITS THE DISTANCE MEASURED FROM THE SADDLE/CARRIAGE TO THE CENTRE OF THE SPINDLE.
What are face plates used for on the lathe machines?
On a wood turning lathe, the faceplate is screwed to the piece of wood, then the faceplate is held in place by the chuck. This facilitates free-wheeling the opposite end for such items as bowls. Almost similar to a wood turning lathe, the face plate on a metal lathe is a device that is used instead of a chuck. It allows a workpiece to be clamped or bolted to it for machining.
Give the type of lathe machine?
Lathe specifications· Distance between centers· Swing over the bed· Swing over the cross slide· Horse power of the motor· Number of speeds
What has the author Edgar T Westbury written?
Edgar T. Westbury has written: 'Milling in the lathe' -- subject(s): Milling-machines 'Ignition equipment'
