The first two digits indicates a Chromium-Molybdenum alloy steel the last two digits indicates carbon content roughly 0.4 percent.
though India has a lot of ores.most of the steel plants have old machinery and technology. most Intergrated plants are more than 40 years old maybe in the future we may upgrade them to more powerful and latest ones
There are tires with innertubes and some that don't need them. The tire is filled to recommended pressures of about 30-40 PSI with air or some kind of inert gas. The pressure is great enough to push the sidwalls of the tire against the wheel that keeps air from leaking out.
50-60 is fastest allowed its usually around 30-40
Schedule 40 and schedule 80 have the same outside diameter (OD). The wall thickness is greater on schedule 80 than it is on schedule 40. So on schedule 80 the inside diameter (ID) gets smaller.
between 30 and 40 degrees preferably 37 like pipe
They each refer to different grades of steel.The reinforcement steel bars used in RCC (Reinforced Cement Concrete) are designated into grades as Fe415 or Fe500 depending on their Yield Strength.The numbers 415 and 500 tell about this Yield Strength in N/mm2 the bars are designed and manufactured to have.Differences between 'Fe415 steel' and 'Fe500 steel':Fe415 has a minimum Yield Strength of 415 N/sq.mm and Fe500 has a minimum Yield Strength as 500 N/sq.mm.The minimum Ultimate Tensile Strength (UTS) of is 485 N/mm2 and that of Fe500 is 545 N/mm2.The minimum Percentage Elongation for Fe415 is 14.5 and that of Fe500 is 12.
The halfway line seat number at Stamford bridge east upper stand is seat 40.
WD-40 stands for water displacement and 40 is the number of times it took to get the correct solution/ fluid/spray to make water displacement
6 x 40 x 17.25 = 4140
Boys of Steel has 40 pages.
40% = 0.4
The 'MP' in 'MP40' stands for maschinenpistole. The number '40' refers to the fact that it was the 40th machine pistol prototype.
about 40-45%
Body taper 40
40% of a number= 40% * the number= 0.40 * the number= 0.40 of a number
With CANNON- first number (40) is the bore diameter in millimeters. Second number (60) is the length of the barrel in calibres- Note the spelling of calibre. It means the barrel is 60 times as long as it is wide.
40