answersLogoWhite

0

No, it is not recommended to apply water-based polyurethane over a surface that has been previously coated with oil-based polyurethane. The two types of polyurethane do not adhere well to each other, which can lead to issues with the finish. It is best to sand down the surface and remove the oil-based polyurethane before applying the water-based polyurethane.

User Avatar

AnswerBot

5mo ago

What else can I help you with?

Related Questions

Can you apply water-based polyurethane over a surface that has been previously coated with oil-based polyurethane?

No, it is not recommended to apply water-based polyurethane over a surface that has been previously coated with oil-based polyurethane. The two types of polyurethane do not adhere well to each other, which can lead to issues with the finish. It is best to stick with the same type of polyurethane for recoating.


Can you apply epoxy over a surface that has been previously coated with water-based polyurethane?

Yes, epoxy can be applied over a surface that has been previously coated with water-based polyurethane. However, it is important to properly prepare the surface by sanding it lightly and cleaning it thoroughly before applying the epoxy to ensure proper adhesion.


How long after staining can you apply polyurethane to the wood surface?

You should wait at least 24 hours after staining before applying polyurethane to the wood surface. This allows the stain to fully dry and ensures a smooth and even finish when applying the polyurethane.


Can you apply polyurethane over old polyurethane for refinishing furniture?

Yes, you can apply polyurethane over old polyurethane when refinishing furniture. It is important to properly prepare the surface by sanding and cleaning it before applying the new coat of polyurethane for best results.


How can I effectively strip polyurethane from a surface?

To effectively strip polyurethane from a surface, you can use a chemical stripper specifically designed for polyurethane. Apply the stripper according to the manufacturer's instructions, let it sit for the recommended time, then scrape off the softened polyurethane with a putty knife or scraper. Repeat the process if necessary until the surface is free of polyurethane. Be sure to wear protective gear and work in a well-ventilated area when using chemical strippers.


Can you apply polyurethane to pergo floors?

No! Polyurethane needs a porous surface and because pergo is not, you would only ruin the floor.


Can I apply water-based polyurethane over oil-based polyurethane?

Yes, you can apply water-based polyurethane over oil-based polyurethane, but it is important to properly prepare the surface and follow the manufacturer's instructions for best results.


Why is the final coat of polyurethane rough?

The final coat of polyurethane may be rough due to factors such as improper application technique, dust or debris on the surface, or the use of old or expired polyurethane.


What is the most effective method for removing polyurethane using a polyurethane remover?

The most effective method for removing polyurethane using a polyurethane remover is to apply the remover to the surface, let it sit for the recommended time, and then scrape off the softened polyurethane using a scraper or putty knife.


How to use steel wool on polyurethane for a smooth finish?

To use steel wool on polyurethane for a smooth finish, lightly sand the surface with fine-grade steel wool in between coats of polyurethane. This will help remove any imperfections and create a smooth surface for a professional-looking finish. Be sure to clean the surface thoroughly after sanding to remove any residue before applying the next coat of polyurethane.


Why is polyurethane separating from table after sanding off marine spar varnish?

Often, poly will not adhere due to contaminants on the surface. Remove all of the loose coating, sand the surface, brush off the surface with a brush, then remove the remainder the dust with a tack cloth.


Can you stain over polyurethane to change the color of the wood surface?

Yes, you can stain over polyurethane to change the color of the wood surface, but it may not penetrate as deeply as on unfinished wood. Sanding the polyurethane lightly before applying the stain can help improve the adhesion and color absorption.