To install a door window panel, first remove the door panel and any existing window components. Place the new window panel in the door frame and secure it in place. Reattach the door panel and test the window to ensure it functions properly.
remove door panel, install new window
Remove the rear passenger door panel. With the door panel removed the entire window mechanism will be visible. Place the new window in the window track. Secure the window with the retaining clips.
Remove the inside door panel. Unhook the wiring harness from the window motor. Remove the retaining screws. Reverse the process to install the new window motor.
Phone and modem options
the inner door panel has to come off and the whole window unbolts and it will come out.
The passenger window on a windstar is best installed by a professional. However, if you have some auto repair experience, you can easily remove the door panel on the door by removing the screws and then you will be able to install the new window.
Programs and features
Remove the inside door panel. Remove the window clips that hold the window onto the track. The window will come out. Reverse the process to install the new window.
Take the door panel off, remove the old reg. Install the new one... If you don't know how to take the door panel off, best to stop there
Remove the inside door panel. Slide the new glass up through the window opening. Set the new glass in the window track.
To install a new window regulator on a MGRZ driver's door, remove the door panel and the wiring attached to the power window mechanism. Remove stereo speaker from the inside door and the window glass. Remove the old window regulator and replace with new.
Remove the inside door panel of your 1997 Mercury Cougar. Remove the wiring harness from the window motor. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install the new window motor.