To determine the size of a vacuum hose, measure the diameter of the hose using a ruler or caliper. The most common sizes for vacuum hoses are 1.25 inches, 1.5 inches, and 2 inches.
You look up the size of the hose from the instructors manual that came with the vacuum you purchased. Then you look for stores near you which have the hose your vacuum needs and then you buy the vacuum hose.
To determine the hose size based on the outer measurement, measure the outer diameter of the hose using a caliper or ruler. Then, refer to a hose size chart or consult the manufacturer's specifications to find the corresponding hose size based on the measured outer diameter.
The best way to repair a vacuum hose on your Chevrolet is to replace the vacuum hose. The vacuum hose is held in place with a retaining clamp on each end of the hose.
The doors are controlled by a vacuum hose. Chances are the vacuum hose cracked or broke due to age allowing a leak. replacement hose is available by the foot at any auto parts store, take in a piece to match the size of the hose.
There is no transmission vacuum hose. That is a vent hose.
The vacuum hose is probably 5/32" ID. The other question I don't have the answer.
5mm. Any car parts place has this, but be sure you get fuel hose not vacuum hose.
lenth
3.5mm
Its the hose that attached to a vacuum. Its where the suction is transferred from the vacuum cleaner to any attachments. Its also generically referred to as a vacuum for your car.
That would be a vacuum hose with a hole in it, burst isn't usually a term I would use with a vacuum hose as it tends to imply pressure pushing out.
Google iit using keywords 1999 Hyundai (size of engine) vacuum hose routing