To effectively unclog a 1 1/2 inch shower drain, you can try using a plunger or a drain snake to remove the blockage. If these methods don't work, you may need to use a chemical drain cleaner or call a professional plumber for assistance.
Bleach works in the amount of about one half cup poured into the drain, but you will have to air the bathroom for about a period of 2 hours.and allow the bleach to work for 12 hours.
To effectively drain sediment from your water heater, follow these steps: Turn off the power or gas supply to the heater, connect a hose to the drain valve at the bottom of the tank, open the valve and let the water and sediment drain out, close the valve, refill the tank, and turn the power or gas supply back on. Repeat this process every 6-12 months to maintain your water heater's efficiency.
The Power of Shower was created on 2007-12-02.
Dun shower after 12
Showers in NY State have to be a minimum of 900 sq. in. (30 x 30). If the shower is on a base you can measure the center. If a shower base is going to be made of tile you can put the drain anywhere as long as the tile base pitches to the drain. I've put them inches from walls. At least center it in the other direction so it looks nice.
To flush a water heater effectively, first turn off the power or gas supply. Next, connect a hose to the drain valve at the bottom of the tank and run it to a drain. Open the valve and let the water drain out completely. Close the valve, refill the tank, and turn the power or gas back on. Repeat this process every 6-12 months to prevent sediment buildup and maintain efficiency.
To effectively seal shower grout and prevent water damage while maintaining its appearance, you can use a silicone-based grout sealer. Apply the sealer to the grout lines using a small brush or roller, making sure to cover the entire surface. Allow the sealer to dry completely before using the shower. Reapply the sealer every 6-12 months to maintain its effectiveness.
Singing in the Drain was created on 2001-12-07.
Drain Cosmetics was created on 2006-06-12.
12
Yes
The standard measurement for a toilet drain rough-in is 12 inches from the finished wall to the center of the drain.