To remove the smoke alarm cover and change the battery, first locate the tabs or screws on the cover. Use a screwdriver or twist the tabs to unlock the cover. Carefully remove the cover and replace the old battery with a new one. Make sure to test the smoke alarm after replacing the battery to ensure it is working properly.
To change the battery in a Porsche key, first remove the emergency key and the cover on the back of the key housing. Change the battery and replace the cover and emergency key.
to change the battery you have to remove the panel over it located towards the right side then remove the cables and then put a new battery and replace the cover
You have to remove the drive side tire and the wheel cover to get to the battery.
Open up the trunk Remove the wood/carpet cover in the back. Unbolt the strap for the battery and remove it. Unbolt the bolts on the +/- sides of the battery. Remove the battery.
Remove padded cover from battery, sometimes you have to slide relays up out the way, depending on model. Locate 13mm bolt at front and remove, battery will lift out. To stop the alarm sounding turn the ignition on while removing battery.
How to remove battery cover to replace battery
1. Remove the front left tire. (drivers side) 2. Find a plastic cover with a battery picture on it inside the wheel well. (on your left) 3. Remove the cover to reveal the battery. 4. Remove battery.
I know that you have to take off your negative battery cable, then your positive battery cable, but I can't remember if there is any kind of bolt to remove at the bottom on the side of the cover in order to lift the cover off. When the dealer changed my battery they threw the cover in the trash!
There is a cover that is over the battery on a Citroen C4 that will have to be removed to expose the battery. There are several screws that will need removed and then the cover lifts right off. Remove the battery connections and lift the battery out.
Disconnect the battery, remove the cover, remove the cables and boots, and remove the spark plugs. Put in the new spark plugs, replace the cables and boots, replace the cover and connect the battery.
The battery, on a 2009 Dodge avenger, can be removed by first removing the battery cover. Remove the battery cables and the retaining rod. The battery can be lifted out.
Open Glovebox, LHS Remove Battery cover by removing screw and lifting cover gently away. Disconnect battery leads, (Negative first) Battery slides out lifting gently.