To fill an AC system with freon, you will need to locate the low-pressure port on the system, connect the freon canister to the port, and slowly release the freon into the system while the AC is running. It is important to follow the manufacturer's instructions and safety guidelines when handling freon.
Connect a freon gauge and freon tank to the low side ac port. With the engine running and ac on high, open the freon tank to fill the system to the full line on the gauge.
Connect a gauge and freon can to the low side port of the ac system. Start the car and turn ac on high. Fill freon till the gauge shows full.
Connect a freon gauge and can to the low side AC port. Start the car and turn the AC on high. Open the freon valve and fill the system to full on the gauge reading.
The Freon is added through the low side ac port. Using the proper type of Freon and a gauge, fill the system to the recommended pressure.
Yes. Or leak check with nitrogen.
Connect a freon gauge and tank to the low side ac port on the 97 Park Ave. with the ac on high and engine running, open the freon valve. Fill the system till the gauge reads full.
Use a freon gauge and freon refill can. Connect the gauge to the low pressure ac port of the 2003 Stratus. With the engine running and ac on high, fill the system until the gauge shows full.
To fill freon in an AC unit, you need to first locate the service valves on the unit. Then, connect a charging hose to the low-pressure service valve. Next, slowly add the appropriate amount of freon to the system while monitoring the pressure levels. It is important to follow safety guidelines and regulations when handling freon.
Connect a freon tank an gauge to the Astros low side ac port. Start the engine and open the ac to high. Open the freon tank and fill the system till the gauge shows full.
Freon is added through the low side ac pressure port. Connect the hose from the gauge and Freon and allow Freon to fill the system until the gauge shows full. The engine and ac need to be running during this process. Make sure to follow all directions on the Freon can.
Connect freon gauges and a freon container to the low side ac port of the 1991 Integra. With the engine running and the ac on high, open the freon valve to fill the system until the gauge reads full.
Remove the freon from the ac system and release the pressure on the 2001 Dodge. Loosen the fittings on the dryer and remove it. Install a new drier, and new o rings. Pull a vacuum on the system then fill with new freon.