To wire a wall outlet, first turn off the power to the circuit. Remove the cover plate and outlet from the wall. Connect the black wire to the brass screw, the white wire to the silver screw, and the green or bare wire to the green screw. Secure the wires with screws and carefully place the outlet back into the wall. Finally, replace the cover plate and turn the power back on to test the outlet.
If your getting a shock by touching a wall than you have a bare wire touching the wall, call an electrition
To properly install and wire a switched outlet in your home, follow these steps: Turn off the power to the outlet at the circuit breaker. Remove the existing outlet from the wall. Install a new electrical box for the switch next to the outlet. Run a new wire from the outlet to the switch box. Connect the black wire from the outlet to one terminal on the switch. Connect the white wire from the outlet to the neutral wire in the switch box. Connect the black wire from the power source to the other terminal on the switch. Connect the ground wires together and to the switch and outlet. Install the switch and outlet back into the wall. Turn the power back on and test the switched outlet to ensure it is working properly.
To safely add a ground wire to an outlet, turn off the power to the outlet at the circuit breaker, remove the outlet cover plate and outlet from the wall, connect the new ground wire to the grounding screw on the outlet, and then securely attach the other end of the ground wire to a metal grounding source, such as a metal outlet box or a grounding rod. Finally, reassemble the outlet and cover plate, and turn the power back on to test the outlet.
To wire an outlet safely and correctly, first turn off the power to the circuit at the breaker box. Remove the cover plate and outlet from the wall. Connect the black wire to the brass screw, the white wire to the silver screw, and the bare copper wire to the green screw. Secure the wires with the screws and carefully tuck them back into the outlet box. Finally, reattach the outlet and cover plate, and turn the power back on to test the outlet.
To connect an outlet, first turn off the power to the circuit at the breaker box. Remove the cover plate and outlet from the wall. Connect the black wire to the brass screw, the white wire to the silver screw, and the green or bare wire to the green screw. Secure the outlet in place and replace the cover plate. Turn the power back on and test the outlet to ensure it is working properly.
To safely install a two-wire outlet in your home, follow these steps: Turn off the power to the circuit you will be working on at the breaker box. Remove the old outlet and disconnect the wires. Connect the black wire to the brass screw, the white wire to the silver screw, and the ground wire to the green screw on the new outlet. Secure the outlet in place and cover with a wall plate. Turn the power back on and test the outlet to ensure it is working properly. If you are unsure or uncomfortable with any step, consult a licensed electrician for assistance.
See: "How can you re-wire a wall switch that controls an outlet to control a ceiling fan?" (Follow the link below.) The procedure is the same whether the new device is a light fixture or a ceiling fan.
Simply run a wire from that outlet to that wall switch. Be sure you use the exact same wire size that you find in that outlet. It will be AWG 12/2 or 14/2. Do not mixes wire sizes. Connect the ground to green ground screw at outlet, and white wire to silver screw, and black wire to gold screw. At the light switch connect all white wires together under a wire nut and push them back into the box. Connect the ground wire to the green ground screw on the switch. Now connect the 2 black wires you have left, power in and power out, to the 2 screws on the switch. Does not matter which wires you connect to the 2 screws.
To properly install a USB outlet in your home, follow these steps: Turn off the power to the outlet at the circuit breaker. Remove the existing outlet cover and outlet from the wall. Connect the USB outlet's wires to the corresponding wires in the wall using wire nuts. Secure the USB outlet to the wall box and attach the cover plate. Turn the power back on and test the outlet to ensure it is working properly. If you are unsure or uncomfortable with electrical work, consider hiring a professional electrician for installation.
You need to splice the extension Romex, using wire nuts, inside a covered junction box made for the purpose. If you can do it within the original outlet box you can put a blank cover on the box. If not you may have to install a new "old work" box in wall. If you can get to wire in attic or basement you could put the junction box in one of those locations. The junction box must be accessible so you can't bury it in the wall.
No, it must be on a dedicated circuit of it's own. It must be on AWG 12/2 wire with 20 amp breaker. It also must be protected with a GFCI outlet.
You don't.