answersLogoWhite

0

The air conditioning system uses a coil to cool the air in a room by circulating refrigerant through the coil. As warm air from the room passes over the coil, the refrigerant absorbs the heat from the air, cooling it down. The cooled air is then circulated back into the room, lowering the overall temperature.

User Avatar

AnswerBot

6mo ago

What else can I help you with?

Related Questions

What is the purpose of the evaporator coil in an air conditioning system?

The purpose of the evaporator coil in an air conditioning system is to absorb heat from the indoor air, causing the refrigerant inside the coil to evaporate and cool the air that is then circulated back into the room.


What is the purpose of the condenser coil in an air conditioning system?

The purpose of the condenser coil in an air conditioning system is to release heat from the refrigerant gas, causing it to condense into a liquid state, which allows the air conditioner to cool the indoor air effectively.


What happens if you install a 2 ton coil to a 3 ton air conditioning unit?

I'm not an air conditioning expert, but I would expect that the compressor will run a lot more than it needs to. A 2 ton coil will not cool as much air as a larger capacity 3 ton coil. Experts?


Why is airconditioning not cool?

Air condition is not cool because it might be leaking. If there are any leaks in an air conditioning system it will not work.


What is the purpose of an ac coil?

Hi: Pretty much to put it in as simple as perspective as I can is to just say an A.C. ( Air Conditioning Coil ) < notice------ not cooling nor heating , but Conditioning coil, Conditions the air in which you are trying to prep for one reason or another. To dehumidify it, humidify it, heat it, cool it, clean it, on and on and on. Is there more that I can say? Hope this Helps: Jimiwane


In order for an air-conditioning coil to remove moisture from the air it must be below the - temperature of the air?

In order to remove moisture from the air, the air-conditioning coil must be below the dew point temperature of the air. This allows the coil to cool the air below its dew point, causing water vapor to condense and be removed.


What are the benefits of the Mr Cool 24k mini split air conditioning system?

The Mr Cool 24k mini split air conditioning system offers energy efficiency, quiet operation, customizable temperature control, and easy installation.


What source of energy does air conditioning use?

Air conditioning systems typically use electricity as the primary source of energy to operate. The electricity powers the compressor, which circulates refrigerant through the system to remove heat from the indoor air and cool the space. Some advanced air conditioning systems may also utilize solar power or geothermal energy as alternative energy sources.


If the evaporator coil is clogged so almost no air passes through what will happen?

With no air flow through the coil the ability to cool a house will be diminished severely. The coil will also over cool itself and eventually ice up and stop all air flow. This could result in overheating the blower motor as it cannot move air through a blocked coil.


What is the evaporator coil?

An evaporator coil is a vital part of any heating or cooling system. It is usually found in an air conditioner, because evaporator coils are particularly good at absorbing heat when air is passed through their system. Evaporator coils look like a series of pipes.


What is the function of the compressor fan motor in an air conditioning system?

The compressor fan motor in an air conditioning system is responsible for circulating air over the condenser coils to help dissipate heat and cool down the refrigerant gas. This process is essential for the overall cooling function of the air conditioning system.


What separates the high pressure and low pressure sides of the air conditioning system and acts as a metering valve to control the flow of refrigerant?

The expansion valve separates the high pressure and low pressure sides of the air conditioning system and acts as a metering valve to control the flow of refrigerant. It reduces the pressure and temperature of the refrigerant before it enters the evaporator coil to create cool air for the interior of the vehicle.