first you load the film like in the standard projector set your starting frame in the window, open the side door to the housing and you will see 2 carbon arc rod holders one for the anode rod and one for the cathode rod. crank the advance mechanism to the far rearward settings and place the rods in the mounts. when starting movies bring rods together to touch creating an arc between the rods back off rods to allow light to fill gap on light card on top of projector housing rods will stay at set rate of travel. at end of 20 minutes reel do your change over to other projector and repeat process. use caution carbon arc rods are extremely hot after use.
She is a projector of lies and falsehoods.The projector is broken again.I operate the projector at the cinema.
Electricity
An arc lamp is a lamp that produces light by an electric arc. The carbon arc light, which consists of an arc between carbon electrodes in air, invented by Humphry Davy in the early 1800s, was the first practical electric light.
Any electrode holder that will accommodate the size of rod can be used. Twin Carbon Arc Welding requires a specific holder. Air Carbon Arc Gouging requires a special holder that also supplies a stream of air.
A Carbon Arc Torch works by creating an electrical arc between two carbon electrodes. When current flows between the two electrodes, it ionizes the surrounding air, creating a high-temperature arc of light and heat. This intense heat can be used for welding, cutting, or melting metals.
Any welding supply carries or can order for you, air arc carbon rods. They are the same that is used for air carbon arc gouging. Carbons are produced in two shapes, flat and round and various sizes. You would want the round ones.
Carbon arc lighting died out decades ago. The only carbon arc lamps still used today are restored World War II searchlights used for promotional purposes.
The element used in lighter flints and carbon-arc lamps is cerium. It is a rare earth metal that creates sparks when struck against a rough surface, making it ideal for ignition systems in lighters. In carbon-arc lamps, cerium is used as part of the electrode material to create an arc of light when an electric current passes through it.
carbon arc lamp
A carbon arc emission spectrograph is a piece of scientific equipment. Emission spectography is used to measure radiation intensity, and provides information about atoms and molecules as well as chemical composition of objects.
A carbon rod is a solid form of carbon that is often used in devices like batteries, electrolytic cells, and arc lamps. It is known for its high melting point, good electrical conductivity, and resistance to chemical corrosion.
you use carbon electrodes in a electic arm holder that creates a arc at the bottom and melts any steel that comes through it.