No, it is not safe to use a 20 amp outlet on a 15 amp breaker as it can overload the circuit and pose a fire hazard. It is important to match the outlet with the appropriate breaker amperage for safety.
No, it is not safe to use a 15 amp outlet on a 20 amp breaker as it can lead to overheating and potential fire hazards. It is important to match the outlet's amp rating with the breaker's amp rating for safety.
No, it is not safe to use a 15 amp outlet on a 20 amp circuit as it can lead to overheating and potential fire hazards. It is important to match the outlet's amp rating with the circuit's amp rating for safety reasons.
No, it is not safe to use a 20 amp outlet on a 15 amp circuit as it can overload the circuit and potentially cause a fire hazard. It is important to match the outlet with the circuit's amp rating to ensure safety.
The size breaker you use is determined by the size wire used in the circuit. If you use AWG #12/2 wire then use a 20 amp breaker. If you use AWG # 14/2 then use a 15 amp breaker.
Not unless the wire going to the refrigerator outlet is AWG 10/2. If it is wired with 12/2 wire then you must use a 20 amp breaker. Using a 30 amp breaker is dangerous and a fire hazard.
Probably not. If the appliance has multiple heating levels then you might get away with it. In this scenario you would only be able to use 30 amps of the appliance's 40 amp capacity before the breaker would trip.
No, a breaker needs to be loaded less than 80 percent. As they reach their tripping point they get hot. The circuit rating, breaker and wiring is not designed for 21 amps. The next size would be a 25 to 30 amp breaker that has #10 wire feeding it.
Yes, you can use a 15 amp outlet on a 20 amp circuit. The outlet's amp rating should not exceed the circuit's amp rating.
No, 10 gauge wire requires the use of a 30 amp breaker. A 20 amp breaker is only used on 12 gauge wire.
No, it is not safe to use 10 gauge wire with a 30 amp breaker as the wire is not rated for that high of a current. It is important to use the correct wire gauge that matches the breaker amperage to prevent overheating and potential fire hazards. For a 30 amp breaker, you should use at least 10 gauge wire.
You can use the wire rated for 20 amps on a 15 amp receptacle but you can not use a 20 amp fuse on any device rated at 15 amps. This is a tricky part of the code about receptacle outlets, You can use a 15 amp duplex outlet on a 20 amp circuit. (duplex outlet two devices can plug in) If it is a single outlet then the outlet must be rated 20 amp. NEC table210.21(B)(3). ============ A 15 amp duplex receptacle can be wired to a 20 amp rated circuit. This means the breaker OR fuse protecting the circuit can be rated 20 amps if the wire is also rated at 20 amps (12 AWG). --Sparkfighter
No, it is not safe to use a #8 conductor on a 50 amp breaker. A #8 conductor is only rated at 45 amps capacity. By connecting it to a 50 amp breaker, which would trip at 50 amps on an overload, would overload the conductor by an extra 5 amps. This would be a conflict against the electrical code.